Read Sony DCR-DVD510E / DCR-DVD910 / DCR-DVD910E / HDR-UX10 / HDR-UX10E / HDR-UX19E / HDR-UX20 / HDR-UX20E / HDR-UX9E (serv.man3) Service Manual online
SECTION 6
ADJUSTMENTS
Revision History
Revision History
Sony EMCS Co.
Auto-ADJ
Ver. 1.2 2008.06
9-852-269-53
2008F0500-1
© 2008.6
Published by Kohda TEC
RMT-835
DCR-DVD510E/DVD910/DVD910E/
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
Link
Link
CAMERA SYSTEM ADJUSTMENTS
VIDEO SYSTEM ADJUSTMENTS
PREPARATIONS BEFORE ADJUSTMENTS
CAMERA SECTION ADJUSTMENTS
USB SERIAL No. INPUT
DESTINATION DATA WRITE
ADJUSTMENT PROGRAM
LCD/EVF SYSTEM ADJUSTMENTS
AUDIO SYSTEM ADJUSTMENTS
ERROR
POWER ADJUSTMENT
DIAGNOSIS
TROUBLESHOOTING
SERVO ADJUSTMENT
AUDIT (Drive Adjustment Program)
PREPARATIONS BEFORE ADJUSTMENTS
DRIVE SECTION ADJUSTMENTS
APPLICATION FOR ADJUSTMENT (SeusEX)
SERVICE MODE
DATA BACKUP
SERVICE MODE
Adjusting items when replacing main parts and boards
List of service tools
Before starting adjustments
DCR-DVD510E/DVD910/DVD910E/
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E
• Use this Service Manual together with the Automatic Adjustment Program (HDR-UX20 Series Auto-Adj
Ver_1.2r03.exe or DCR-DVD910 Series Auto-Adj Ver_1.2r03.exe) and the AUDIT (Drive Adjustment Program).
HD model: HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E
• Automatic Adjustment Program: HDR-UX20 Series Auto-Adj Ver_1.2r03.exe
SD model: DCR-DVD510E/DVD910/DVD910E
• Automatic Adjustment Program: DCR-DVD910 Series Auto-Adj Ver_1.2r03.exe
— 2 —
DCR-DVD510E/DVD910/DVD910E/
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF
MORE THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF
MORE THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
Optical sensor disc (J-6082-570-A)
CAUTION
In the process of adjusting optical power,
CLASS1M laser optical radiates. so do not
remove this sensor disk.
CLASS1M laser optical radiates. so do not
remove this sensor disk.
6-1
DCR-DVD510E/DVD910/DVD910E/
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
6. ADJUSTMENTS
Before starting adjustments
1-1. Adjusting items when replacing main parts and boards
When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1:
The Automatic Adjustment Program does not support.
Note 2:
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E only.
Note 3:
HDR-UX19E/UX20/UX20E only.
Note 4:
When replacing the Flash memory block, erase the data in internal memory before replacement.
Note 5:
IC2101 (Flash memory) on the VC-521 board and IC4302 (Flash memory) on the VC-521 board cannot be replaced.
Table 6-1-1
Lens device
Drive block
LCD block LCD901 (LCD panel)
EVF block LCD902 (LCD panel)
Flash unit
Microphone unit MIC901
Flash memory block (Note 3, 4)
CMOS block assy (Including CM-093 board and CMOS imager)
BL-023 board D5701 (EVF backlight)
FR-283 board SE6501, 6502 (PITCH, YAW sensor)
VC-521 board X1301 (Clock generator)
VC-521 board IC2401 (D/A conv.)
VC-521 board IC2501 (Component out AMP) (Note 2)
VC-521 board IC2801 (Video out, Audio I/O)
VC-521 board IC3101 (EVF drive)
VC-521 board IC4101 (RF process)
VC-521 board IC4201 (DVD DSP)
VC-521 board IC4401 (DVD mecha drive)
PD-353 board IC6101 (LCD drive)
PD-353 board D6106-6108 (LCD backlight)
BL-023 board (COMPLETE)
FR-283 board (COMPLETE)
VC-521 board (COMPLETE)
PD-353 board (COMPLETE)
Destination Data
Write
Write
Destination data write
z
USB Serial No.
Input
Input
USB serial No. input
z
(Note 1)
Origin oscillation check
z
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
COMPONENT OUT Y level adj.
COMPONENT OUT Pb level adj.
COMPONENT OUT Pr level adj.
STEADY HALL adj.
HALL & MR adj.
CAMERA
adjustment 2
adjustment 2
Flange back adj.
z
z
z
CAMERA
adjustment 3
adjustment 3
Flange back check
z
z
z
F No. & ND light qualiy
standard data input
Mechanical shutter adj
Linear matrix adj.
standard data input
Mechanical shutter adj
Linear matrix adj.
AWB standard data input
LV standard data input
AWB adj.
Color reproduction adj. & check
MAX GAIN adj.
White defect adj.
Black defect adj.
Black defect adj.
CAMERA
adjustment 7
adjustment 7
Strobe light level & white balance adj.
z
z
CAMERA
adjustment 8
adjustment 8
GYRO sensor sensitivity adj.
z
z
z
z
LCD automatic adj.
V-COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Sample hold phase adj.
EVF automatic adj.
Sample hold phase adj.
EVF automatic adj.
White balance adj.
AUDIO adjustment Internal 3ch microphone sensitivity adj.
z
z
z
POWER adj.
z
z
z
z
z
SERVO adj.
z
z
z
z
z
z
AUDIT
z
z
EVF
adjustment
adjustment
z
z
z
z
CAMERA
adjustment 4
adjustment 4
CAMERA
adjustment 5
adjustment 5
CAMERA
adjustment 1
adjustment 1
z
z
z
z
z
z
z
LCD
adjustment
adjustment
z
Touch panel
adjustment
adjustment
Touch panel adj.
CAMERA
adjustment 6
adjustment 6
Adjustment
z
Adjusting item
COMPONENT
OUT adjustment
(Note 2)
OUT adjustment
(Note 2)
S VIDEO OUT and
VIDEO OUT
adjustment
VIDEO OUT
adjustment
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Replaced parts
Board
replacement
Parts replacement
Block replacement
6-2
DCR-DVD510E/DVD910/DVD910E/
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
HDR-UX9E/UX10/UX10E/UX19E/UX20/UX20E_ADJ
1-2. List of service tools
• Oscilloscope
• Color monitor
• Frequency counter
• Amplifier built-in speaker for PC
• Adjustment sound source file
Fig. 6-1-1 (1)
Note 1:
Personal computer
OS:
OS:
Windows 2000/XP (Camera Section)
Windows 2000 SP4 or later/XP SP2 or later (Drive Section)
Windows 2000 SP4 or later/XP SP2 or later (Drive Section)
RAM: 256MB or more recommended
USB: 2.0 recommended (also compatible with 1.1)
USB: 2.0 recommended (also compatible with 1.1)
Three connectors are required.
Note 2:
The following programs and driver must already be installed in the personal computer. (Contact our service headquarters of each
area how to get the programs and driver)
• SeusEX
area how to get the programs and driver)
• SeusEX
• Optical power meter driver
• AUDIT
Personal computer
(Note 1, 2)
(Note 1, 2)
J-1
HASP key and application
for adjustment (SeusEX)
for adjustment (SeusEX)
Contact our service headquarters of each
area how to get the application for
adjustment (SeusEX) and HASP key.
area how to get the application for
adjustment (SeusEX) and HASP key.
J-2
USB cable
1-829-868-31
1-829-868-31
J-3
J-10
J-6
J-4
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-7
Color bar chart
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
J-8
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-9
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
J-11
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
J-5
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
J-13
Camera table
J-6082-384-A
J-6082-384-A
J-14
Optical power meter
J-6082-569-A
J-6082-569-A
J-15
Optical sensor disc
J-6082-570-A
J-6082-570-A
J-12
Background paper
J-2501-130-A
J-2501-130-A
