DCR-DVD408 (serv.man2) - Sony Movie Service Manual (repair manual). Page 9

Read Sony DCR-DVD408 (serv.man2) Service Manual online

1-5
DCR-DVD408_L2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1-6-2. E : 62 : 11 [Shift Lens Overheating (Pitch)] Occurred
Connect by the SeusEX and perform the following process.
Order Block Page Address Data
Procedure
1
11
80
6BB2
01
Write the data.
2
11
80
7D46
F0
Write the data.
3
11
80
7D48
01
Write the data. (Note 1)
4
11
80
7D48
00
Write the data.
5
11
80
7D46
10
Write the data.
6
11
80
7D48
01
Write the data. (Note 1)
7
11
80
7D48
00
Write the data.
8
11
80
6BB2
00
Write the data.
9
Check if the shift lens moves while setting the order 2 to 7. If the shift lens does not move,
replace the lens block (Note 2). When the shift lens moved, proceed to the order 10.
10
While setting the order 2 to 7, measure with an oscilloscope the output voltage of R5721 in the
periphery of IC5703 on the LD-216 board to check the output voltage varies.
11
If the output voltage does not vary, replace the lens block (Note 2). When the output voltage
varied, proceed to the order 12.
12
Turn the power OFF.
While measuring with an oscilloscope the output voltage of R5792 in the periphery of IC5703
13
on the LD-216 board, turn the power ON to check that the output voltage immediately after the
power on change as shown in Fig. 2.
If the output voltage change as shown in Fig. 2, replace the lens block (Note 2). If it does not
14
change as shown in Fig. 2, inspect the camera control circuit (IC1803 of VC- 478 board) pe
riphery.
Note 1: Finish this operation within 10 seconds. If it is likely to take more than 10 seconds, set block: 11, page: 8D, address:
7D48, data: 00, and then retry.
Note 2: When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ.
After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the
handheld operation.
Page of 87
Display

Click on the first or last page to see other DCR-DVD408 (serv.man2) service manuals if exist.