DCR-DVD406E, DCR-DVD408, DCR-DVD408E, DCR-DVD506E, DCR-DVD508, DCR-DVD508E, DCR-DVD808, DCR-DVD808E, DCR-DVD908, DCR-DVD908E (serv.man6) - Sony Movie Service Manual (repair manual). Page 4

— 4 —

DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ

&

[Check 2 using method]
Use this menu when E:62:11 (Shift Lens Overheating (Pitch))
occurred.
Click the [Check 2 Start] button, and the shift lens will move in
up and down directions. If the shift lens does not move, replace
the lens block.

[Check 3 using method]
Use this menu when E:62:12 (Shift Lens Overheating (Yaw))
occurred.
Click the [Check 3 Start] button, and the shift lens will move in
left and right directions. If the shift lens does not move, replace
the lens block.

Use the “Shift Lens Check” when the following self diagnostic
codes are displayed.

•

E:62:10 [Shift Lens Initializing Failure]

•

E:62:11 [Shift Lens Overheating (Pitch)]

•

E:62:12 [Shift Lens Overheating (Yaw)]

Click the [Shift Lens Check] button on the Service Mode screen,
and the “SHIFT LENS CHECK” screen will appear.

[Check 1 using method]
Use this menu when E:62:10 (Shift Lens Initializing Failure) oc-
curred.
Click the [Check 1 Start] button, and the “EEPROM Check” and
“Steady Hall Adjustment” will be executed.

•

When “Steady Hall Adjustment” is executed, the shift lens will
move in up, down, left, and right directions. If the shift lens
does not move at all and a message “Shift Lens Check 1 Com-
plete” is displayed, or if an error message of Steady Hall Ad-
justment is displayed, replace the lens block.

•

Check the peripheral circuits (particularly EEPROM (IC1804))
of the IC1803 on the VC-478 board, when the following mes-
sage is displayed.

+