DCR-DVD406E, DCR-DVD408, DCR-DVD408E, DCR-DVD506E, DCR-DVD508, DCR-DVD508E, DCR-DVD808, DCR-DVD808E, DCR-DVD908, DCR-DVD908E (serv.man6) - Sony Movie Service Manual (repair manual). Page 2

Read Sony DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man6) Service Manual online

— 2 —
DCR-DVD406E/DVD408/DVD408E/DVD506E/DVD508/DVD508E/DVD808/DVD808E/DVD908/DVD908E_ADJ
  Befor change
  After change
  For reference, Note 3 in Japanese after change is given below.
• Change of Note 3 for Alignment Disc
6-2. DRIVE SECTION ADJUSTMENTS
2-1.
PREPARATIONS BEFORE ADJUSTMENTS (DRIVE SECTION)
2-1-4.
Alignment disc
(Service manual page 6-38)
Note 3: If the DVD-R Disc for Self Jitter, DVD-RW Reference + DOW Disc and DVD+RDL Self Disc exceeds the use limit, the
following message will be displayed. Replace it with a new disc and click the [OK] button in the message window.
The disc use counts are saved in the PC. Accordingly, the disc and PC used for diagnosis and adjustment must always be
controlled in the same combination.
If the disc is used with another PC, it will be recognized as a new disc, causing the use limit to be unknown.
Note 3: If the use counts of the DVD-R Disc for Self Jitter, DVD-RW Reference + DOW Disc, or DVD+RDL Disc for Self Jitter
exceed respective limits, the following message will be displayed. Replace it with a new disc and click the [OK] button in the
message window.
The disc use counts are saved in the PC. Accordingly, the disc used for diagnosis and adjustment, PC and drive adjustment
program (AUDIT for 2007) must always be controlled in the same combination.
If the disc is used with another PC or other versions (AUDIT for Service, AUDIT for UX1, etc.), the diagnosis and adjust-
ment will fail and that disc will no longer be able to use.
注3:DVD-R セルフジッターディスク,DVD-RWリファレンス+ DOWディスクとDVD+RDLセルフジッターディスクは,
使用限度を超えると次のメッセージが表示されます。新しいディスクと交換して,メッセージの[OK]ボタンをクリッ
クしてください。 
ディスクの使用回数は,PC内部に保存されます。このため,診断・調整で使用するディスクとPCおよびドライブ
調整プログラム(AUDIT for 2007)は,常に同一の組み合わせになるように管理してください。 
別のPCや他のバージョン(AUDIT for Service,AUDIT for UX1等)でディスクを使用すると,診断・調整が正常に
行われずNGとなってしまい,そのディスクが使用不可能になってしまう場合があります。 
Page of 4
Display

Click on the first or last page to see other DCR-DVD406E / DCR-DVD408 / DCR-DVD408E / DCR-DVD506E / DCR-DVD508 / DCR-DVD508E / DCR-DVD808 / DCR-DVD808E / DCR-DVD908 / DCR-DVD908E (serv.man6) service manuals if exist.