DCR-DVD405 (serv.man3) - Sony Movie Service Manual (repair manual). Page 58

Read Sony DCR-DVD405 (serv.man3) Service Manual online

6-55
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
2-1-4.
Alignment disc
To diagnose and adjust the drive block, the discs listed in the following table are used.
Note 1:
Use the specified disc that matches each diagnostic and adjustment item. (A message is displayed by the AUDIT)
If a wrong disc is used, the disc could be destroyed and could not be reused.
Note 2:
Handle the disc with care, and before use, check if the disc is scratched or dirty.
Note 3:
If the DVD-R for Self Jitter Disc, DVD-RW Reference + DOW Disc and DVD+RW Reference Disc exceeds the use limit, the
following message will be displayed. Replace it with a new disc and click the 
[OK]
 button in the message window.
Name
DVD-R
Reference Disc
DVD-R
for Self Jitter Disc
DVD-RW
Reference + DOW
Disc
DVD+RW
Reference Disc
Use
Diagnosis and adjustment of DVD-R
Diagnosis and adjustment of DVD-R
Diagnosis and adjustment of DVD-RW
Diagnosis and adjustment of DVD+RW
Remark
Useable counts are limitless, unless scratched.
Use a new blank disc of DMR30 (commercial DVD-R disc).
This disc can be used about 160 times for the diagnosis and adjust-
ment. (Note 3)
The record address of the disc is controlled by the AUDIT, and ac-
cordingly prepare exclusive disc for each AUDIT.
If the disc is replaced before the use limit, the setting must be re-
newed with the “<DVD-R> Write Address”.
This disc can be used about 400 times for the diagnosis and adjust-
ment. (Note 3)
This disc can be used about 660 times for the diagnosis and adjust-
ment. (Note 3)
Table 6-2-1
Fig. 6-2-5
Page of 90
Display

Click on the first or last page to see other DCR-DVD405 (serv.man3) service manuals if exist.