Read Sony DCR-DVD405 (serv.man3) Service Manual online
DCR-DVD404E/DVD405/DVD405E/DVD805/DVD805E_ADJ
6-2
Precaution on Replacing the VC-427 Board
• Perform “Exif Model Data Check” mentioned below, and also the adjustment items necessary after VC Board re-
placement.
Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replacing etc., check the data setting (Exif Model Data) is right. If not,
rewrite to the right value.
When the data has changed because of board replacing etc., check the data setting (Exif Model Data) is right. If not,
rewrite to the right value.
Exif Model Data
Writing Method:
1) Select page: 0, address: 01 and set data: 01.
2) Select page: A, address: B7 to BA, and set the Exif Model Data.
1) Select page: 0, address: 01 and set data: 01.
2) Select page: A, address: B7 to BA, and set the Exif Model Data.
Note:
To write in the non-volatile memory (EEPROM), press the PAUSE (Write) button each time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Address
B7
B8
B9
BA
Page
A
A
A
A
Data
DCR-DVD405
34
30
35
00
DCR-DVD805
38
30
35
00
DCR-DVD404E
34
30
34
45
DCR-DVD405E
34
30
35
45
DCR-DVD805E
38
30
35
45
Click on the first or last page to see other DCR-DVD405 (serv.man3) service manuals if exist.