Read Sony DCR-DVD405 (serv.man2) Service Manual online
1-4
DCR-DVD405_L2
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1-6. PROCESS
O APÓS FIXADO ERRO DO FLASH
When “FLASH error” (Self-diagnosis Code E:91:**) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is
changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Connect the adjustment remote commander and perform the following process.
changed automatically to disabling charge and flash setting.
After fixing, this setting needs to be deactivated. Connect the adjustment remote commander and perform the following process.
Order Page Address Data
Procedure
1
7
01
75
2
7
00
01
Press PAUSE button.
3
7
02
Check the data changes to “01”.
1-7.
PRECAUÇÃO SOBRE REPARO DA PLACA VC-427
Exif Model Data Check
When you replace to the repairing board, the written data of repairing board also might be changed to original setting.
When the data has changed because of board replaceing etc, check the data setting (Exif Model Data) is right. If not, rewrite to the right value.
When the data has changed because of board replaceing etc, check the data setting (Exif Model Data) is right. If not, rewrite to the right value.
Exif Model Data
Writing Method:
1) Select page: 0, address: 01 and set data: 01.
2) Select page: A, address: B7 to BA, and set the Exif Model Data.
1) Select page: 0, address: 01 and set data: 01.
2) Select page: A, address: B7 to BA, and set the Exif Model Data.
Note: To write in the non-volatile memory (EEPROM), press the PAUSE (Write) button each time to set the data.
3) Select page: 0, address: 01, and set data: 00.
Page
A
A
A
A
Data
DCR-DVD405
34
30
35
00
DCR-DVD805
38
30
35
00
DCR-DVD404E
34
30
34
45
Address
B7
B8
B9
BA
DCR-DVD405E
34
30
35
45
DCR-DVD805E
38
30
35
45
Click on the first or last page to see other DCR-DVD405 (serv.man2) service manuals if exist.