Read Sony DCR-DVD403 / DCR-DVD403E / DCR-DVD803 / DCR-DVD803E (serv.man2) Service Manual online
SERVICE MANUAL
DIGITAL VIDEO CAMERA RECORDER
LEVEL
2
• For ADJUSTMENTS (SECTION 6), refer to SERVICE MANUAL, ADJ (9-876-867-51).
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-867-41). (EXCEPT J MODEL)
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (9-876-867-41). (EXCEPT J MODEL)
• Reference number search on printed wiring boards is available.
• TO TAKE OUT A DISC WHEN DISC COVER DOES NOT OPEN (FORCE OPEN)
Link
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
SERVICE NOTE
DISASSEMBLY
BLOCK DIAGRAMS
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
SPECIFICATIONS
Link
Revision History
Revision History
Ver. 1.5 2007. 09
On the CD-565, MA-439, VF-168, MD-114 and VC-397 board
This service manual provides the information that is premised the circuit board replacement service and not intended repair
inside the CD-565, MA-439, VF-168, MD-114 and VC-397 board.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the CD-565,
MA-439, VF-168, MD-114 and VC-397 board are not shown.
The following pages are not shown.
inside the CD-565, MA-439, VF-168, MD-114 and VC-397 board.
Therefore, schematic diagram, printed wiring board, waveforms, mounted parts location and electrical parts list of the CD-565,
MA-439, VF-168, MD-114 and VC-397 board are not shown.
The following pages are not shown.
Mounted parts location ....................... Pages 4-101 to 4-103
Electrical parts list .............................. Pages 5-17 to 5-30
Electrical parts list .............................. Pages 5-17 to 5-30
How to use
Acrobat Reader
How to use
Acrobat Reader
Schematic diagram ............................. Pages 4-21 to 4-68
Printed wiring board ............................ Pages 4-83 to 4-96
Waveforms ........................................... Pages 4-98 to 4-99
Printed wiring board ............................ Pages 4-83 to 4-96
Waveforms ........................................... Pages 4-98 to 4-99
Sony EMCS Co.
2007I0800-1
©2007.09
Published by Kohda TEC
9-876-867-31
DCR-DVD403/DVD403E/
DVD803/DVD803E
RMT-835
DCR-DVD403/DVD403E/DVD803/DVD803E
Photo : DCR-DVD403E
DCR-DVD403
US Model
Canadian Model
Japanese Model
DCR-DVD403E
AEP Model
UK Model
North European Model
DCR-DVD803E
Australian Model
Hong Kong Model
Chinese Model
DCR-DVD803
Korea Model
DCR-DVD403/DVD803/
DVD803E
E Model
DCR-DVD803/DVD803E
Tourist Model
— 2 —
DCR-DVD403/DVD403E/DVD803/DVD803E
SPECIFICATIONS
ENGLISH
JAPANESE
ENGLISH
JAPANESE
For movies:
42.8 - 495mm (1 11/16 - 19 1/2
in.) (16:9 mode)
42.8 - 495mm (1 11/16 - 19 1/2
in.) (16:9 mode)
*2
45 - 450mm (1 13/16 - 17 3/4
in.) (4:3 mode)
For still images:
37 - 370mm (1 1/2 - 14 5/8 in.)
in.) (4:3 mode)
For still images:
37 - 370mm (1 1/2 - 14 5/8 in.)
Color temperature [AUTO], [ONE PUSH],
[INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
Minimum
illumination
illumination
5 1x (lux) (F1.8)
0 lx (lux) (in the NightShot
function)
0 lx (lux) (in the NightShot
function)
*3
*1
“Exif” is a fi le format for still images,
established by the JEITA (Japan Electronics
and Information Technology Industries
Association). Files in this format can have
additional information such as your camcorder’s
setting information at the time of recording.
established by the JEITA (Japan Electronics
and Information Technology Industries
Association). Files in this format can have
additional information such as your camcorder’s
setting information at the time of recording.
*2
In 16:9 mode, the focal length fi gures are actual
fi gures resulting from wide angle pixel readout.
fi gures resulting from wide angle pixel readout.
*3
Objects unable to be seen due to the dark can be
shot with infrared lighting.
shot with infrared lighting.
•
Manufactured under license from Dolby
Laboratories.
Input/Output connectors
Audio/Video
10 pin connector
input/output
Input/Output auto switch
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω
(ohms), unbalanced
Luminance signal: 1 Vp-p, 75
Luminance signal: 1 Vp-p, 75
Ω
(ohms), unbalanced
Chrominance signal:
0.286 Vp-p (DVD403/DVD803)
0.3 Vp-p (DVD403E/DVD803E)
75
0.286 Vp-p (DVD403/DVD803)
0.3 Vp-p (DVD403E/DVD803E)
75
Ω
(ohms), unbalanced
Audio signal: 327 mV (at Load
impedance 47 k
impedance 47 k
Ω
(kilohms)),
Input inpedance more than
47 k
47 k
Ω
(kilohms), Output
impedance less than 2.2 k
Ω
(kilohms)
USB jack
mini-B
REMOTE jack
Stereo mini-minijack (Ø 2.5
mm)
mm)
LCD screen
Picture
6.9 cm (2.7 type, aspect ratio
16:9)
16:9)
Total number
123 200 (560
×
220)
of pixels
General
Power
7.2 V (battery pack)
requirements
8.4 V (AC adaptor)
Average power During camera recording using
consumption
consumption
LC
4.9W
4.9W
4.5W
D
(when using the
battery pack)
battery pack)
Viewfi nder
Operating
0
°
C to + 40
°
C (32
°
F to 104
°
F)
temperature
Storage
-20
°
C to + 60
°
C (-4
°
F to
temperature +
140
°
F)
Dimensions
(Approx.)
(Approx.)
62
×
93
×
133mm(2 1/2
×
3 3/4
×
5 1/4 in.) (whd)
Mass (Approx.)
520 g (1 lb 2 oz) main unit only
620 g (1 lb 5 oz) including the
NP-FP70 rechargeable battery
pack and disc
NP-FP70 rechargeable battery
pack and disc
Supplied
See page 5-12.
accessories
AC Adaptor AC-L25A/L25B
Power
AC 100 - 240 V, 50/60 Hz
requirements
Current
0.35 - 0.18 A
consumption
Power
18W
consumption
Output voltage DC 8.4V
*
Operating
0
°
C to + 40
°
C (32
°
F to 104
°
F)
temperature
Storage
-20
°
C to + 60
°
C (-4
°
F to
temperature +
140
°
F)
Dimensions
56 31 100 mm (2 1/4
×
(Approx.) 1
1/4
×
4 in.) (w
×
h
×
d)
excluding the projecting parts
Mass (Approx.) 190 g (6.7 oz) excluding the
power cord
*
See at the label of AC adaptor for other
specifi cations.
specifi cations.
Rechargeable battery pack
NP-FP70
NP-FP70
Maximum
DC 8.4V
output voltage
Output voltage
DC 7.2V
Capacity
9.8 wh (1360 mAh)
Dimensions
31.8
×
33.3
×
45.0 mm
(Approx.) (1
5/16
×
1 5/16
×
1 13/16 in.)
(w
×
h
×
d)
Mass (Approx.) 85 g (2 oz)
Operating
0
°
C to + 40
°
C (32
°
F to 104
°
F)
temperature
Type
Li-ion
Design and specifi cations are subject to change
without notice.
without notice.
System
Video
MPEG2/JPEG (Still images)
compression
format
format
Audio compression
format
format
Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Dolby Digital 5.1 Creator
Video signal
NTSC color, EIA standards
Usable discs
8cm DVD-R/
DVD-RW
/
DVD+RW
Recording Movie
format DVD-R:DVD-VIDEO
format DVD-R:DVD-VIDEO
DVD-RW:DVD-VIDEO
(VIDEO mode), DVD-
VideoRecording (VR mode)
(VIDEO mode), DVD-
VideoRecording (VR mode)
DVD+RW:DVD+RW Video
Still image
Exif
Exif
*1
Ver.2.2
Recording/
HQ: Approx. 20 min
playback time
SP: Approx. 30 min
LP: Approx. 60 min
LP: Approx. 60 min
Viewfi nder
Electric viewfi nder
color
color
Image device
5.9 mm (1/3 type) CCD
(Charge Coupled Device)
Gross:
Approx. 3 310 000 pixels
Effective (Movie):
Approx. 2 048 000 pixels
Effective (Still):
Approx. 3 048 000 pixels
(Charge Coupled Device)
Gross:
Approx. 3 310 000 pixels
Effective (Movie):
Approx. 2 048 000 pixels
Effective (Still):
Approx. 3 048 000 pixels
Lens Carl
Zeiss
Vario-Sonnar
T
*
Filter diameter:30mm (1 3/16
in.)
Optical:10, Digital:20, 120
in.)
Optical:10, Digital:20, 120
◊
F=1.8-2.9
Focal length
5.1 - 51mm (7/32 - 2 1/8 in.)
When converted to a 35 mm
still camera
When converted to a 35 mm
still camera
(DVD403/DVD803)
PAL color, CCIR standards
(DVD403E/DVD803E)
(DVD403E/DVD803E)
• Abbreviation
CND : Canadian model
NE
NE
: North European model
AUS : Australian model
HK
HK
: Hong Kong model
KR
: Korea model
JE
: Tourist model
DCR-DVD403E
AEP, UK, NE
PAL
DCR-DVD803
E, KR, JE
NTSC
DCR-DVD403
US, CND ,E
NTSC
Table for difference of function
Model
Destination
Color System
DCR-DVD803E
E, HK, AUS, JE
PAL
— 3 —
DCR-DVD403/DVD403E/DVD803/DVD803E
ENGLISH
JAPANESE
ENGLISH
JAPANESE
— 4 —
DCR-DVD403/DVD403E/DVD803/DVD803E
ENGLISH
JAPANESE
ENGLISH
JAPANESE
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
“pinched” or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
• Unleaded solder melts at a temperature about 40
°
C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°
C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
The use of optical instrument with this product will increase eye
hazard.
