Read Sony DCR-DVD205 / DCR-DVD205E / DCR-DVD304E / DCR-DVD305 / DCR-DVD305E / DCR-DVD705 / DCR-DVD705E / DCR-DVD755 / DCR-DVD755E (serv.man2) Service Manual online
DVD305E/DVD705/DVD705E/DVD755/DVD755E_L2
mark
ber specified.
marque
Ne les remplacer que par une pièce
portant le numéro spécifié.
DVD305E/DVD705/DVD705E/DVD755/DVD755E_L2
DCR-DVD205E/DVD304E/DVD305E/DVD705E/DVD755E.
Dolby Digital Stereo Creator
Dolby Digital 5.1 Creator
(VR mode)
SP: Approx. 30 min
LP: Approx. 60 min
color
Device)
Gross:
Approx. 1 070 000 pixels
Effective (Movie,4:3)
Approx. 690 000 pixels
Effective (Movie,16:9)
Approx. 670 000 pixels
Effective (Still, 4:3)
Approx. 1 000 000 pixels
Effective (Still, 16:9)
Approx. 750 000 pixels
Filter diameter: 25mm (1 in.)
Optical:12, Di gital:24, 800
F=1.8-2.5
When converted to a 35 mm still camera
For movies:
46 - 628.5mm (1 13/16 - 24 3/4 in.) (16:9)
For still images:
40 - 480mm (1 5/8 - 19 in.)(4:3)
43.6 - 523.2mm (1 3/4 - 20 5/8 in.) (16:9)
[OUTDOOR] (5 800 K)
0 lx (lux) (in the NightShot plus function)
by the JEITA (Japan Electronics and Information
Technology Industries Association). Files in this
format can have additional information such as
your camcorder’s setting information at the time
of recording.
figures resulting from wide angle pixel readout.
shot with infrared lighting.
DCR-DVD205E/DVD705E
Video signal: 1 Vp-p, 75
Chrominance signal: 0.3 Vp-p, 75
Audio signal: 327 mV (at Load impedance
47 k
Video signal: 1 Vp-p, 75
Chrominance signal: 0.3 Vp-p, 75
Audio signal: 327 mV (at Load impedance
47 k
Input/Output auto switch
Video signal: 1 Vp-p, 75
Chrominance signal: 0.3 Vp-p, 75
Audio signal: 327 mV (at Load impedance
47 k
8.4 V (AC Adaptor)
Viewfinder
430 g (15 oz) including the NP-FP50
rechargeable battery pack and disc
460 g (1 lb) including the NP-FP50
rechargeable battery pack and disc
Mains lead (1)
A/V connecting cable (1)
USB cable (1)
(For DCR-DVD305E/DVD755E)
Wireless Remote Commander (1)
(For DCR-DVD304E/DVD305E/DVD755E)
Rechargeable battery pack
NP-FP50 (1)
Cleaning cloth (1)
Shoe cover (1)
(For DCR-DVD304E/DVD305E/DVD755E)
Lens cap (1)
Surround microphone ECM-L100 (1)
(For DCR-DVD304E/DVD305E/DVD755E)
CD-ROM "Picture Package Ver.1.8.1" (1)
(For DCR-DVD304E/DVD305E/DVD755E)
Operating Guide (This manual) (1)
specifications.
without notice.
DVD305E/DVD705/DVD705E/DVD755/DVD755E_L2
BR
JE
NE
DVD305E/DVD705/DVD705E/DVD755/DVD755E_L2
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
connections. Check the entire board surface for solder splashes
and bridges.
"pinched" or contact high-wattage resistors.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
• Unleaded solder melts at a temperature about 40
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
heated tip is applied for too long, so be careful!
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
also be added to ordinary solder.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Use of controls or adjustments or perfor mance
procedures other than those specified herein may
result in hazardous radiation exposure.
hazard.