Read Sony DCR-DVD202E / DCR-DVD203 / DCR-DVD203E / DCR-DVD703 / DCR-DVD703E (serv.man3) Service Manual online
SERVICE MANUAL
• INSTRUCTION MANUAL is shown at the end of this document.
Revision History
Revision History
Ver. 1.2 2006. 07
LEVEL
1
Link
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
ACCESSORIES
SELF DIAGNOSIS FUNCTION
SPECIFICATIONS
Link
Sony EMCS Co.
2006G1600-1
©2006.07
Published by Kohda TEC
9-876-866-41
DIGITAL VIDEO CAMERA RECORDER
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
DCR-DVD202E/DVD203/DVD203E
DVD703/DVD703E
RMT-835
Photo : DCR-DVD203E
DCR-DVD203
US Model
Canadian Model
Brazilian Model
DCR-DVD202E/DVD203E
AEP Model
UK Model
North European Model
DCR-DVD703E
Australian Model
Hong Kong Model
Chinese Model
DCR-DVD703
Korea Model
DCR-DVD203/DVD703/
DVD703E
E Model
DCR-DVD703/DVD703E
Tourist Model
— 2 —
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
SPECIFICATIONS
Color temperature [AUTO], [ONE PUSH],
[INDOOR] (3 200 K),
[OUTDOOR] (5 800 K)
Minimum
illumination
illumination
7 1x (lux) (F1.8)
0 lx (lux) (in the NightShot
plus function)
0 lx (lux) (in the NightShot
plus function)
*3
*1
“Exif” is a fi le format for still images,
established by the JEITA (Japan Electronics
and Information Technology Industries
Association). Files in this format can have
additional information such as your camcorder’s
setting information at the time of recording.
established by the JEITA (Japan Electronics
and Information Technology Industries
Association). Files in this format can have
additional information such as your camcorder’s
setting information at the time of recording.
*2
In 16:9 mode, the focal length fi gures are actual
fi gures resulting from wide angle pixel readout.
fi gures resulting from wide angle pixel readout.
*3
Objects unable to be seen due to the dark can be
shot with infrared lighting.
shot with infrared lighting.
•
Manufactured under license from Dolby
Laboratories.
Input/Output connectors
Audio/Video
10 pin connector
input/output
Input/Output auto switch
Video signal: 1 Vp-p, 75
Video signal: 1 Vp-p, 75
Ω
(ohms), unbalanced
Luminance signal: 1 Vp-p, 75
Luminance signal: 1 Vp-p, 75
Ω
(ohms), unbalanced
Chrominance signal: 0.286 Vp-
p, 75
p, 75
Ω
unbalanced
Audio signal: 327 mV (at Load
impedance 47 k
impedance 47 k
Ω
(kilohms)),
Input inpedance more than
47 k
47 k
Ω
(kilohms), Output
impedance less than 2.2 k
Ω
(kilohms)
USB jack
mini-B
REMOTE jack
Stereo mini-minijack (Ø 2.5
mm)
mm)
LCD screen
Picture
6.9 cm (2.7 type, aspect ratio
16:9)
16:9)
Total number
123 200 (560
×
220)
of pixels
General
Power
7.2 V (battery pack)
requirements
8.4 V (AC adaptor)
Average power During camera recording using
consumption
consumption
LCD
(when using the
battery pack)
battery pack)
3.5W
Viewfi nder
3.0W
Operating
0
°
C to + 40
°
C (32
°
F to 104
°
F)
temperature
Storage
-20
°
C to + 60
°
C (-4
°
F to
temperature +
140
°
F)
Dimensions
(Approx.)
(Approx.)
57
×
87
×
131mm (2 1/4
×
3
1/2
×
5 1/4 in.) (w
×
h
×
d)
Mass (Approx.) 440 g (15 oz) main unit only
500 g (1 lb 1 oz) including the
NP-FP50 rechargeable battery
pack and disc
NP-FP50 rechargeable battery
pack and disc
Supplied
See page 5-12.
accessories
AC Adaptor AC-L25A/L25B
Power
AC 100 - 240 V, 50/60 Hz
requirements
Current
0.35 - 0.18 A
consumption
Power
18W
consumption
Output voltage DC 8.4V
*
Operating
0
°
C to + 40
°
C (32
°
F to 104
°
F)
temperature
Storage
-20
°
C to + 60
°
C (-4
°
F to
temperature +
140
°
F)
Dimensions
56 31 100 mm (2 1/4
×
(Approx.) 1
1/4
×
4 in.) (w
×
h
×
d)
excluding the projecting parts
Mass (Approx.) 190 g (6.7 oz) excluding the
power cord
*
See at the label of AC adaptor for other
specifi cations.
specifi cations.
Rechargeable battery pack
NP-FP50
NP-FP50
Maximum
DC 8.4V
output voltage
Output voltage
DC 7.2V
Capacity
4.9 wh (680 mAh)
Dimensions
31.8 18.5 45.0 mm
(Approx.) (1
5/16
×
3/4
×
1 13/16 in.)
(w
×
h
×
d)
Mass (Approx.) 40 g (1.5 oz)
Operating
0
°
C to + 40
°
C (32
°
F to 104
°
F)
temperature
Type
Li-ion
Design and specifi cations are subject to change
without notice.
without notice.
System
Video
MPEG2/JPEG (Still images)
compression
format
format
Audio compression
format
format
Dolby Digital 2/5.1ch
Dolby Digital 5.1 Creator
Dolby Digital 5.1 Creator
Video signal
NTSC color
(DVD202E/DVD203E/DVD703E)
PAL color, CCIR standards
(DVD203/DVD703)
, EIA standards
Usable discs
8cm DVD-R/
DVD-RW
/
DVD+RW
Recording Movie
format DVD-R:DVD-VIDEO
format DVD-R:DVD-VIDEO
DVD-RW:DVD-VIDEO
(VIDEO mode), DVD-
VideoRecording (VR mode)
(VIDEO mode), DVD-
VideoRecording (VR mode)
DVD+RW:DVD+RW Video
Still image
Exif
Exif
*1
Ver.2.2
Recording/
HQ: Approx. 20 min
playback time
SP: Approx. 30 min
LP: Approx. 60 min
LP: Approx. 60 min
Viewfi nder
Electric viewfi nder
color
color
Image device
3.27 mm (1/5.5 type) CCD
(Charge Coupled Device)
Gross:
Approx. 1 070 000 pixels
Effective (Movie) :
Approx. 690 000 pixels
Effective (Still) :
Approx. 1 000 000 pixels
(Charge Coupled Device)
Gross:
Approx. 1 070 000 pixels
Effective (Movie) :
Approx. 690 000 pixels
Effective (Still) :
Approx. 1 000 000 pixels
Lens
Carl Zeiss Vario-Tessar
Filter diameter:30mm (1 3/16
in.)
Optical:12, Digital:24, 480
Filter diameter:30mm (1 3/16
in.)
Optical:12, Digital:24, 480
◊
F=1.8-2.5
Focal length
f=3.0 - 36 mm (1/8 - 1 7/16 in.)
When converted to a 35 mm
still camera
For movies:
46 - 628.5mm (1 13/16 - 24 3/4
in.) (16:9 mode)
When converted to a 35 mm
still camera
For movies:
46 - 628.5mm (1 13/16 - 24 3/4
in.) (16:9 mode)
*2
48 - 576mm (1 15/16 - 22 3/4
in.) (4:3 mode)
For still images:
40 - 480mm (1 5/8 - 19 in.)
in.) (4:3 mode)
For still images:
40 - 480mm (1 5/8 - 19 in.)
(ohms)(DVD0203/
(DVD202E/DVD203E/DVD703E)
0.3 Vp-p,75
Ω
(ohms)
DVD703),
— 3 —
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
“pinched” or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
The use of optical instrument with this product will increase eye
hazard.
— 4 —
DCR-DVD202E/DVD203/DVD203E/DVD703/DVD703E
Checking supplied accessories.
Make sure that the following accessories are supplied with your camcorder.
Note :
The components identified by
mark
The components identified by
mark
0
or dotted line with mark
0
are critical for safety.
Replace only with part number
specified.
specified.
Note :
Les composants identifiés par
une marque
Les composants identifiés par
une marque
0
sont critiques
pour la sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Power cord (Main lead)(1)
(AEP, E, NE, BR model)
(AEP, E, NE, BR model)
0
1-769-608-31
Power cord (Main lead)(1)
(AUS model)
(AUS model)
0
1-827-945-12
Power cord (Main lead)(1)
(KR model)
(KR model)
0
1-823-947-12
Power cord (Main lead)(1)
(UK, HK model)
(UK, HK model)
0
1-783-374-12
Power cord (Main lead)(1)
(US, CND model)
(US, CND model)
0
1-790-107-22
Power cord (Main lead)(1)
(JE model)
(JE model)
0
1-790-732-71
Power cord (Main lead)(1)
(CH model)
(CH model)
0
1-782-476-51
AC power adaptor (1)
(AC-L25A/L25B)
(AC-L25A/L25B)
0
1-477-534-11
DVD-R (DMR30) (1)
(not supplied)
(not supplied)
A/V connecting cable
(1.5m) (1)
1-823-156-91
(1.5m) (1)
1-823-156-91
NP-FP50 battery pack (1)
(not supplied)
(not supplied)
Wireless Remote Commander (1)
(RMT-835)
1-478-496-21
(RMT-835)
1-478-496-21
CD-ROM
(SPVD-014 USB Driver) (1)
(EXCEPT DVD202E)
2-320-261-01
(SPVD-014 USB Driver) (1)
(EXCEPT DVD202E)
2-320-261-01
2-pin conversion adaptor (1)
(E, HK model)
1-569-008-21
(E, HK model)
1-569-008-21
Cleaning cloth (1)
3-073-861-01
3-073-861-01
USB cable (1)
(EXCEPT DVD202E)
1-829-868-41
(EXCEPT DVD202E)
1-829-868-41
Other accessories
2-587-622-11 MANUAL, INSTRUCTION (ENGLISH)
(DVD203:US,CND/DVD703:E,JE)
2-587-622-21 MANUAL, INSTRUCTION (FRENCH)(DVD203:CND)
2-587-622-31 MANUAL, INSTRUCTION (SPANISH)
2-587-622-31 MANUAL, INSTRUCTION (SPANISH)
(DVD203:E/DVD703:JE)
2-587-622-41 MANUAL, INSTRUCTION (PORTUGUESE)
(DVD203:E/DVD703:JE)
2-587-622-51 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(DVD703:E)
2-587-622-61 MANUAL, INSTRUCTION (KOREAN)(DVD703:KR,JE)
2-587-623-11 MANUAL, INSTRUCTION (ENGLISH)
2-587-623-11 MANUAL, INSTRUCTION (ENGLISH)
(DVD202E:AEP,UK/DVD203E:AEP/DVD703E:E,JE,HK,AUS)
2-587-623-21 MANUAL, INSTRUCTION (FRENCH)
(DVD202E:AEP/DVD203E:AEP/DVD703E:E)
2-587-623-31 MANUAL, INSTRUCTION (SPANISH/PORTUGUESE)
(DVD202E:AEP/DVD203E:AEP)
2-587-623-41 MANUAL, INSTRUCTION (ITALIAN/GREEK)
(DVD202E:AEP/DVD203E:AEP)
2-587-623-51 MANUAL, INSTRUCTION (GERMAN/DUTCH)
(DVD202E:AEP/DVD203E:AEP)
2-587-623-61 MANUAL, INSTRUCTION (SWEDISH/RUSSIAN)
(DVD202E:AEP/DVD203E:AEP/DVD703E:JE)
2-587-623-71 MANUAL, INSTRUCTION (DANISH/FINNISH)
(DVD202E:NE/DVD203E:NE)
2-587-623-81 MANUAL, INSTRUCTION (ARABIC/PERSIAN))
(DVD703E:E)
2-587-623-91 MANUAL, INSTRUCTION (SIMPLIFIED CHINESE)
(DVD703E:E,JE,CH)
2-593-028-11 MANUAL, INSTRUCTION (TRADITIONAL CHINESE)
(DVD703E:HK)
• Abbreviation
CND : Canadian model
HK
HK
: Hong Kong model
AUS : Australian model
NE
NE
: North European model
KR
: Korea model
JE
: Tourist model
CH
: Chinese model
BR
: Brazilian model
Shoulder strap (1)
2-176-235-11
2-176-235-11
2-pin conversion adaptor (1)
(JE model)
1-569-007-12
(JE model)
1-569-007-12
Lid Battery Case
(3-083-973-01)
(3-083-973-01)
Shoe cover (1)
2-586-356-01
2-586-356-01
Ver 1.1 2005. 05