Read Sony DCR-DVD201 / DCR-DVD201E (serv.man2) Service Manual online
DCR-DVD201/DVD201E
2. DISASSEMBLY
2. DISASSEMBLY
2-5
2-6
2-2. SERVICE POSITION
VC-354
VC-354
Control switch block
(PS8700) (20P)
(PS8700) (20P)
Monitor TV
Extension cable (100P)
(J-6082-352-A)
(J-6082-352-A)
AC power
adaptor
adaptor
AC IN
Adjustment remote
commander (RM-95)
commander (RM-95)
LANC
DC-IN
CN1006
CN1007
CN1001
CN4901
VC-354 board
MD-104 board
MA-429 board
MD-104
VC-354
[SERVICE POSITION TO CHECK THE DVD DRIVE SECTION]
Connection to Check the DVD drive section
Connection to Check the DVD drive section
To check the DVD drive section, set the DVD drive to PLAY mode. (Set the mode dial to PLAY position,
or set forced PLAY mode by using the adjustment remote commander.)
Operate the DVD drive using the adjustment remote commander (with the HOLD switch set in the OFF position).
Note: Removing the control switch block (PS8700) means removing the LID OPEN switch. Therefore the DVD
drive section will not move even if the forced PLAY mode is set up.
or set forced PLAY mode by using the adjustment remote commander.)
Operate the DVD drive using the adjustment remote commander (with the HOLD switch set in the OFF position).
Note: Removing the control switch block (PS8700) means removing the LID OPEN switch. Therefore the DVD
drive section will not move even if the forced PLAY mode is set up.
Setting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 02, and press the
PAUSE button of the adjustment remote commander.
Exiting the forced PLAY mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press the
PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
CN4902
AUDIO/
VIDEO jack
VIDEO jack
2
1
3
B
B
5
6
4
B
B
3
4
5
2
6
B
1
7
D
E
D
D
1
4
3
2
B
2
1
5
D
3
4
4
3
1
2
5
D
CPC-8 jig
(J-6082-388-A)
(J-6082-388-A)
7
9
qa
qf
qd
0
qs
B
B
B
8
B
B
8
6
qa
5
3
0
4
D
D
D
1
7
9
2
Click on the first or last page to see other DCR-DVD201 / DCR-DVD201E (serv.man2) service manuals if exist.