Read Sony DCR-DVD200 / DCR-DVD200E / DCR-DVD300 (serv.man3) Service Manual online
106
Dubbing to a tape
Before operation
•Set [DISPLAY] in
(OTHERS) to LCD in
the SETUP display. (The default setting is
[LCD].)
[LCD].)
•Press the following buttons to make the
indicators disappear so that they will not be
superimposed on the edited tape:
– DISPLAY/BATT INFO
– DISPLAY on the Remote Commander
– DATA CODE on the Remote Commander
superimposed on the edited tape:
– DISPLAY/BATT INFO
– DISPLAY on the Remote Commander
– DATA CODE on the Remote Commander
1
Insert the recorded disc into your
camcorder.
camcorder.
2
Prepare the VCR for recording.
Insert a blank tape (or a tape you want
to record over) into the VCR.
Set the input selector to LINE.
Refer to the operating instructions of the
VCR.
Insert a blank tape (or a tape you want
to record over) into the VCR.
Set the input selector to LINE.
Refer to the operating instructions of the
VCR.
3
Play back the recorded disc on your
camcorder.
camcorder.
4
Start recording on the VCR.
Refer the operating instructions of your
VCR.
Refer the operating instructions of your
VCR.
When you have finished dubbing
Stop recording on the VCR, then press x on
your camcorder.
your camcorder.
Dubbing a disc to a tape
Click on the first or last page to see other DCR-DVD200 / DCR-DVD200E / DCR-DVD300 (serv.man3) service manuals if exist.