Read Sony DCR-DVD150E / DCR-DVD450E / DCR-DVD650 / DCR-DVD650E / DCR-DVD850 / DCR-DVD850E (serv.man2) Service Manual online
1-3E
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
DVD650E/DVD850/DVD850E_L2
1-5-3. Self-diagnosis Code Table
C
C
C
C
E
E
E
E
E
E
E
Block
Function
0
4
1
3
1
3
2
1
2
0
3
1
6
1
6
1
6
1
9
4
9
4
Detailed
Code
0
0
0
1
0
2
0
0
0
0
0
0
0
0
1
0
1
1
0
0
0
1
Symptom/State
Non-standard battery is used.
“Memory Stick Duo” is unformatted.
“Memory Stick Duo” is broken.
“Memory Stick Duo” is broken.
Disc access error
Condensaton.
Flash memory data are rewritten.
Drive fault
Difficult to adjust focus
(Cannot initialize focus.)
(Cannot initialize focus.)
Zoom operations fault
(Cannot initialize zoom lens.)
(Cannot initialize zoom lens.)
The abnormalities in initialization of
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
the focus lens and the abnormalities in
initialization of the zoom lens occurred
simultaneously.
Fault of writing to or erasing the flash
memory
memory
Internal flash memory fault
Self-diagnosis Code
Repaired b
y:
Correction
Use the InfoLITHIUM battery.
Format the “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Insert a new “Memory Stick Duo”.
Clean the disc with the supplied cleaning cloth.
Use a compatible disc with the camcorder.
Use a compatible disc with the camcorder.
Remove the disc, and insert it again after one hour.
Make flash memory data correct value. (Note 1)
Inspect or replacement of the mechanism deck, IC (IC4401 on
the VC-552 board) and drive block.
the VC-552 board) and drive block.
Inspect the lens block focus reset sensor (pin 8 of CN5401 on
the VC-552 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5401 on the VC-552 board)
when the focusing is not performed.
the VC-552 board) when focusing is performed when the focus
buttons of the touch panel are pressed in the focus manual mode,
and the focus motor drive circuit (IC5401 on the VC-552 board)
when the focusing is not performed.
Inspect the lens block zoom reset sensor (pin 0 of CN5401 on
the VC-552 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5401 on
the VC-552 board) when zooming is not performed.
the VC-552 board) when zooming is performed when the zoom
lever is operated, and the zoom motor drive circuit (IC5401 on
the VC-552 board) when zooming is not performed.
Check whether the flexible board of the lens is broken, and
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5401 on the VC-552 board).
check whether it is inserted imperfectly. If there is no problem in
the flexible board, inspect the focus/zoom motor drive circuit
(IC5401 on the VC-552 board).
Inspect the flash memory (IC7801 on the VC-552 board). (Note 1)
Inspect the internal flash memory (IC8701 on the VC-552 board)
(DVD450E/DVD850/DVD850E only)
(DVD450E/DVD850/DVD850E only)
Note 1:
Start the Adjust manual in the Adjust station and refer to the “DESTINATION DATA WRITE”.
Click on the first or last page to see other DCR-DVD150E / DCR-DVD450E / DCR-DVD650 / DCR-DVD650E / DCR-DVD850 / DCR-DVD850E (serv.man2) service manuals if exist.