Read Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) Service Manual online
6-11
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
1-4.
USB SERIAL No. INPUT
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model
name) and SERIAL No. into the screen and write them.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model
name) and SERIAL No. into the screen and write them.
1.
Function of Each Button on USB Serial No. Input
Screen
Screen
Click the [USB SERIAL No. INPUT] button on the Main Menu screen,
and the “USB SERIAL No. INPUT” screen in Fig. 6-1-8 will ap-
pear.
and the “USB SERIAL No. INPUT” screen in Fig. 6-1-8 will ap-
pear.
Fig. 6-1-8
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Display area
The “PRODUCT ID”and “SERIAL No.” are displayed.
The “PRODUCT ID”and “SERIAL No.” are displayed.
3
[Check Serial] button
The USB SERIAL No. data is read from the camcorder and
displayed in the display area.
The USB SERIAL No. data is read from the camcorder and
displayed in the display area.
4
[Read and Save] button
The USB SERIAL No. data is read from the camcorder and
saved in PC as a file.
Default file name is as follows:
(Example: MEGA model)
The USB SERIAL No. data is read from the camcorder and
saved in PC as a file.
Default file name is as follows:
(Example: MEGA model)
5
[Load and Write] button
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camcorder.
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camcorder.
6
Input area
Enter “PRODUCT ID” and “SERIAL No.” when writing the
ID for service.
The “PRODUCT ID” is set from the last 5 characters of model
name if the model name is selected.
For the “SERIAL No.”, read it from the label on the camcorder
body and enter it.
Enter “PRODUCT ID” and “SERIAL No.” when writing the
ID for service.
The “PRODUCT ID” is set from the last 5 characters of model
name if the model name is selected.
For the “SERIAL No.”, read it from the label on the camcorder
body and enter it.
7
[Write Manually] button
The USB SERIAL No. data entered in the input area is written
to the camcorder.
The USB SERIAL No. data entered in the input area is written
to the camcorder.
5
3
4
2
7
6
1
DCR-DVD710_SERIAL_xxxxxxxx_yyyymmdd.dat
Date
USB serial
number
Data name
USB serial
number
Data name
Click on the first or last page to see other DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) service manuals if exist.