Read Sony DCR-DVD106E / DCR-DVD108 / DCR-DVD108E / DCR-DVD109E / DCR-DVD608 / DCR-DVD608E (serv.man5) Service Manual online
SERVICE MANUAL
Auto-ADJ
DCR-DVD106E/DVD108/DVD108E/DVD109E/DVD608/DVD608E_ADJ
Ver. 1.1 2007.03
Sony EMCS Co.
9-852-173-81
2007C0500-1
© 2007.3
Published by Kohda TEC
SUPPLEMENT-1
File this supplement with the service manual.
(DI06-180)
• Change of Note 3 for Alignment Disc
Befor change
After change
6-2. DRIVE SECTION ADJUSTMENTS
2-1.
PREPARATIONS BEFORE ADJUSTMENTS (DRIVE SECTION)
2-1-4.
Alignment disc
(Service manual page 6-34)
Note 3:
If the DVD-R Disc for Self Jitter, DVD-RW Reference + DOW Disc and DVD+RDL Self Disc exceeds the use limit, the
following message will be displayed. Replace it with a new disc and click the [OK] button in the message window.
The disc use counts are saved in the PC. Accordingly, the disc and PC used for diagnosis and adjustment must always be
controlled in the same combination.
If the disc is used with another PC, it will be recognized as a new disc, causing the use limit to be unknown.
following message will be displayed. Replace it with a new disc and click the [OK] button in the message window.
The disc use counts are saved in the PC. Accordingly, the disc and PC used for diagnosis and adjustment must always be
controlled in the same combination.
If the disc is used with another PC, it will be recognized as a new disc, causing the use limit to be unknown.
Note 3:
If the use counts of the DVD-R Disc for Self Jitter, DVD-RW Reference + DOW Disc, or DVD+RDL Disc for Self Jitter
exceed respective limits, the following message will be displayed. Replace it with a new disc and click the [OK] button in the
message window.
The disc use counts are saved in the PC. Accordingly, the disc used for diagnosis and adjustment, PC and drive adjustment
program (AUDIT for 2007) must always be controlled in the same combination.
If the disc is used with another PC or other versions (AUDIT for Service, AUDIT for UX1, etc.), the diagnosis and adjustment
will fail and that disc will no longer be able to use.
exceed respective limits, the following message will be displayed. Replace it with a new disc and click the [OK] button in the
message window.
The disc use counts are saved in the PC. Accordingly, the disc used for diagnosis and adjustment, PC and drive adjustment
program (AUDIT for 2007) must always be controlled in the same combination.
If the disc is used with another PC or other versions (AUDIT for Service, AUDIT for UX1, etc.), the diagnosis and adjustment
will fail and that disc will no longer be able to use.
DCR-DVD106E/DVD108/DVD108E/
DVD109E/DVD608/DVD608E
Display
