DCR-DVD105 - Sony Movie Service Manual (repair manual)

dcr-dvd105 service manual
Model
DCR-DVD105
Pages
52
Size
5.18 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / BRAZIL LEVEL 3
File
dcr-dvd105.pdf
Date

Read Sony DCR-DVD105 Service Manual online

MANUAL DE SERVIÇO
LEVEL
 
3
Link
DIAGRAMAS ESQUEMÁTICOS PLACAS DE CIRCUITO IMPRESSO           LISTA DE PEÇAS PARA REPARO
Sony EMCS Co.
Revision History
Instruções do
Acrobat Reader
Ver 1.0  2005.12
DIGITAL VIDEO CAMERA RECORDER
Foto: DCR-DVD105
Os componentes identificados
com a marca 0 são criticos
para a segurança. Somente os
substitua por peças especificadas
nesse manual.
Brazilian Model
DCR-DVD105
  © 2006.02
Publicado por Sony Brasil Ltda.- Engenharia de Qualidade
9-890-022-11
— 3 —
DCR-DVD105
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections.  Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair.  Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration.  Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
VERIFICAÇÃO GERAL DE SEGURANÇA
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
— 4 —
DCR-DVD105
INDICE
4. 
PLACAS DE CIRCUITO IMPRESSO E 
DIAGRAMAS ESQUEMÁTICOS
4-2.
Schematic Diagrams ························································ 4-1
4-3.
Printed Wiring Boards ··················································· 4-51
4-4.
Waveforms ····································································· 4-72
4-5.
Mounted Parts Location ················································ 4-77
5. 
LISTA DE PEÇAS PARA REPARO
5-2.
Electrical Parts List ······················································· 5-13
Section
Title
Page
DCR-DVD105
Link
4-1.  
DIAGRAMAS ESQUEMÁTICOS
VC-421 
PLACA (2/14) (A/D CONVERTER)
VC-421 
PLACA (1/14) (TIMING GENERATOR)
VC-421 
PLACA (11/14) (DVD MECHA DRIVE)
VC-421 
PLACA (9/14) (RF PROCESS)
VC-421 
PLACA (4/14) (CAMERA CONTROL)
VC-421 
PLACA (3/14) (LENS DRIVE, EVR)
VC-421 
PLACA (13/14) (LCD/EVF DRIVE)
VC-421 
PLACA (12/14) (VIDEO, AUDIO I/O)
VC-421 
PLACA (6/14) 
(DVD CODEC, USB I/F, DS/HI CONTROL)
VC-421 
PLACA (5/14) (VIDEO/AUDIO DSP)
DD-246 
PLACA (1/2) (HI CONTROL)
VC-421 
PLACA (14/14) (CONNECTOR)
VC-421 
PLACA (8/14) (DVD DSP)
VC-421 
PLACA (7/14) (FLASH, SDRAM)
DD-246 
PLACA (2/2) (DC/DC CONVERTER)
VC-421 
PLACA (10/14) 
(DVD DRIVE CONTROL)
FORMAS DE ONDAS
NOTAS COMUNS PARA DIAGRAMAS ESQUEMÁTICOS
4. 
PLACAS DE CIRCUITO IMPRESSO E DIAGRAMAS ESQUEMÁTICOS
Page of 52
Display

Download Sony DCR-DVD105 Service Manual (Repair Manual)

Here you can read online and download Sony DCR-DVD105 Service Manual in PDF. DCR-DVD105 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DCR-DVD105 Movie. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.