Read Sony DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man4) Service Manual online
6-72
DCR-DVD105/DVD105E/DVD605/DVD605E_ADJ
2.
Emergence Memory Address
2-1. Emergency Memory Address (Camera section)
Page 1F
Address 1C to 1F
Note:
If reading/writing data on pages 1F, set data: 01 to page: 0,
address: 10, and then select pages: F. By this data setting,
the pages 1F can be selected.
After the data reading/writing finished, return the data on
page: 0, address: 10 to “00”.
address: 10, and then select pages: F. By this data setting,
the pages 1F can be selected.
After the data reading/writing finished, return the data on
page: 0, address: 10 to “00”.
Address
Contents
1C
EMG code when first error occurs
1D
EMG code when second error occurs
1E
EMG code when third error occurs
1F
EMG code when last error occurs
When no error occurs in this unit, data “00” is written in the above
addresses (1C to 1F). when first error occurs in the unit, the data
corresponding to the error is written in the first emergency ad-
dress (1C). In the same way, when the second error occurs, the
data corresponding to the error is written in the second emergency
address (1D).
Finally, when the last error occurs, the data corresponding to the
error is written in the last emergency address (1F).
addresses (1C to 1F). when first error occurs in the unit, the data
corresponding to the error is written in the first emergency ad-
dress (1C). In the same way, when the second error occurs, the
data corresponding to the error is written in the second emergency
address (1D).
Finally, when the last error occurs, the data corresponding to the
error is written in the last emergency address (1F).
Note:
After completing adjustments, be sure to initialize the data
of addresses 1C to 1F to “00”.
of addresses 1C to 1F to “00”.
Initializing method:
Order Page Address Data
Procedure
1
0
01
01
2
6
01
FD
Press PAUSE button.
3
6
02
Check the data changes to
“01”.
“01”.
4
6
01
00
Press PAUSE button.
5
0
01
00
2-2. EMG Code (Emergency Code)
Codes corresponding to the errors which occur are written in 1F
page, addresses 1C to 1F. The type of error indicated by the code
are shown in the following table.
page, addresses 1C to 1F. The type of error indicated by the code
are shown in the following table.
Code
Emergency Type
00
No error
3-5.
SERVICE MODE
Note:
Before performing the adjustment, check the data of page:
0, address: 10 is “00”. If not, select page: 0, address: 00,
and set data “00”.
0, address: 10 is “00”. If not, select page: 0, address: 00,
and set data “00”.
1.
Setting the Test Mode
Page A
Address 10
Data
Function
00
Normal
01
Forced MOVIE mode
02
Forced PLAY/EDIT mode
05
Forced STILL mode
• Before setting the data , select page: 0, address: 01, and set data:
01.
• For page A, the data set will be recorded in the non-volatile
memory by pressing the PAUSE (Write) button of the adjust-
ment remote commander. In this case, take note that the test
mode will not be exited even when the main power is turned off
(8.4 Vdc).
ment remote commander. In this case, take note that the test
mode will not be exited even when the main power is turned off
(8.4 Vdc).
• After completing adjustments/repairs, be sure to return the data
of this address to 00, and press the PAUSE (Write) button of the
adjustment remote commander. And select page: 0, address: 01,
and set data: 00.
adjustment remote commander. And select page: 0, address: 01,
and set data: 00.
Click on the first or last page to see other DCR-DVD105 / DCR-DVD105E / DCR-DVD605 / DCR-DVD605E (serv.man4) service manuals if exist.