Read Sony CCD-TRV89E / CCD-TRV95 / CCD-TRV95E / CCD-TRV95PK / CCD-TRV99 / CCD-TRV99E Service Manual online
5-31
6. V-COM Level Adjustment (PD-93 board)
Set the common electrode drive signal level of LCD to the specified
value.
value.
Mode
VTR stop
Signal
No signal
Measurement point
Pin
4 of CN4501 (PANEL COM) of
PD-93 board
Measuring instrument
Oscilloscope
Adjustment page
E
Adjustment address
D5
Specified value
A = 6.70
±
0.05V
Note1 :
Perform “Bright Adjustment” and “Contrast Adjustment”
before this adjustment.
before this adjustment.
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 01, set data: 55, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 01, set data: 55, and press the PAUSE
button of the adjusting remote commander.
3) Select page: 2, address: 7D, and set data: 00.
4) Select page: E, address: D5, change the data and set the PANEL
4) Select page: E, address: D5, change the data and set the PANEL
COM signal level (A) to the specified value.
5) Press the PAUSE button of the adjusting remote commander.
6) Select page: 3, address: 01, set data: 00, and press the PAUSE
6) Select page: 3, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
7) Select page: 0, address: 01, and set data: 00.
Fig. 5-1-25.
A
2H
7. Color Adjustment (PD-93 board)
Set the color saturation to the standard value. If deviated, the color
will be to dark or light.
will be to dark or light.
Note1:
NTSC model: CCD-TRV95/TRV95PK/TRV99
PAL model: CCD-TRV89E/TRV95E/TRV99E
PAL model: CCD-TRV89E/TRV95E/TRV99E
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 01, set data: 57, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 3, address: 01, set data: 57, and press the PAUSE
button of the adjusting remote commander.
3) Select page: 2, address: 7D, and set data: 20.
4) Select page: E, address: D0, change the data and set the voltage
4) Select page: E, address: D0, change the data and set the voltage
(A) between the green and white to the specified value.
5) Press the PAUSE button of the adjusting remote commander.
6) Only for PAL model, select page: E, address: D9, and set the
6) Only for PAL model, select page: E, address: D9, and set the
same data as page: E, address: D0, and press the PAUSE button
of the adjusting remote commander.
of the adjusting remote commander.
7) Select page: 3, address: 01, set data: 00, and press the PAUSE
button of the adjusting remote commander.
8) Select page: 2, address: 7D, and set data: 00.
9) Select page: 0, address: 01, and set data: 00.
9) Select page: 0, address: 01, and set data: 00.
Mode
VTR stop
Signal
No signal
Measurement point
Pin
3 of CN4501 (VG) of PD-93
board
External trigger : Pin
External trigger : Pin
4 of CN4501
(PANEL COM)
Measuring instrument
Oscilloscope
Adjustment page
E
Adjustment address
D0 (NTSC)
D0, D9 (PAL)
D0, D9 (PAL)
Specified value
A = 0.03
±
0.05V (NTSC)
A = 0.08
±
0.05V (PAL)
Fig. 5-1-26.
White
Green
A
2H
Click on the first or last page to see other CCD-TRV89E / CCD-TRV95 / CCD-TRV95E / CCD-TRV95PK / CCD-TRV99 / CCD-TRV99E service manuals if exist.