CCD-TRV128, CCD-TRV228, CCD-TRV228E, CCD-TRV328, CCD-TRV428, CCD-TRV428E (serv.man2) - Sony Movie Service Manual (repair manual). Page 9

Read Sony CCD-TRV128 / CCD-TRV228 / CCD-TRV228E / CCD-TRV328 / CCD-TRV428 / CCD-TRV428E (serv.man2) Service Manual online

CCD-TRV128/TRV228/TRV228E/TRV328/TRV428/TRV428E
6-7
1-2.
INITIALIZATION  OF  8,  A,  C,  D,  E,  F,  1F
PAGE  DATA
Note:
If reading/writing data on pages 1F, set data: 01 to page: 0,
address: 10, and then select pages F. By this data setting,
the pages 1F can be selected.
After the data reading/writing finished, return the data on
page: 0, address: 10 to “00”.
1. Initializing the 8, A, C, D, E, F, 1F Page Data
Note 1:
If “Initialization of Pages 8, A, C, D, E, F, 1F” is ex-
ecuted, all data on pages 8, A, C, D, E, F, 1F are initial-
ized. (Only an individual page cannot be initialized)
Note 2:
If the 8, A, C, D, E, F, 1F page data has been initialized,
“Modification of 8, A, C, D, E, F, 1F Page Data” and all
adjustments need to be performed again.
Note 3:
Check that the data of page: 0, address: 10 is “00”.
Note 4:
NTSC model: CCD-TRV128/TRV228/TRV328/TRV428
PAL model: CCD-TRV228E/TRV428E
Adjusting Page
8
Adjusting Address
00 to FF
Adjusting Page
A
Adjusting Address
10 to FF
Adjusting Page
C
Adjusting Address
10 to FF
Adjusting Page
D
Adjusting Address
10 to 7F
Adjusting Page
E
Adjusting Address
00 to FF
Adjusting Page
F
Adjusting Address
10 to FF
Adjusting Page
1F
Adjusting Address
00 to FF
Initializing method:
Order Page Address Data
Procedure
1
0
01
01
2
7
03
Set the following data.
00: NTSC model
80: PAL model
3
7
00
Set the following data.
2D: NTSC model
2F: PAL model
4
7
01
Set the following data, and
press PAUSE button.
2D: NTSC model
2F: PAL model
5
7
02
Check the data changes to
“01”.
6
2
00
29
7
2
01
29
Press PAUSE button.
8
Perform “Modification of 8,
A, C, D, E, F, 1F Page Data”
2. Modification of 8, A, C, D, E, F, 1F Page Data
If the 8, A, C, D, E, F, 1F page data has been initialized, change
the data of the “Fixed data-2” address shown in the following table
by manual input.
Modifying method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note:
If copy the data built in the different model, the
camcorder may not operate.
3) When changing the data, press the PAUSE button of the ad-
justment remote commander each time when setting new data
to write the data in the non-volatile memory.
4) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of 8, A, C, D, E, F, 1F
Page data
Order Page Address Data
Procedure
1
2
00
29
2
2
01
29
Press PAUSE button.
Note:
If the following symptoms occur after completing of the
“Modification of 8, A, C, D, E, F, 1F page data”, check
that the data of the “Fixed data-2” addresses of 8, A, C, D,
E, F, 1F page are same as those of the same model of the
same destination.
1) The power is shut off so that unit cannot operate.
3.
8 Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 8, A, C, D, E, F, 1F Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 8, A, C, D, E, F, 1F Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
Page of 50
Display

Click on the first or last page to see other CCD-TRV128 / CCD-TRV228 / CCD-TRV228E / CCD-TRV328 / CCD-TRV428 / CCD-TRV428E (serv.man2) service manuals if exist.