Read Sony CCD-TR913E / CCD-TR950E Service Manual online
5-32
3-1-6. Output Level and Impedance
Video output
Phono jack, 1 Vp-p, 75
Ω
,
unbalanced, sync negative
S video output
4-pin mini DIN
Luminance signal:
Luminance signal:
1Vp-p, 75
Ω
, unbalanced, sync negative
Chrominance signal:
0.286Vp-p 75
Ω
, unbalanced
Audio output
Phono jack,
Input:
Input:
–7.5 dBs, input impedance more
than 47 k
than 47 k
Ω
Output: –7.5 dBs, (at load impedance 47 k
Ω
), impedance
less than 2.2 k
Ω
3-1-7. Recording Mode (Standard 8/Hi8) switching
The record mode (Standard 8/Hi8) of this unit switches as shown in
the following table. The playback mode (Standard 8/Hi8) switches
automatically according to the recording mode of the tape played
back.
the following table. The playback mode (Standard 8/Hi8) switches
automatically according to the recording mode of the tape played
back.
Fig. 5-3-3. Shows the color bar signals recorded on the alignment
tape.
tape.
Note :
Measure using the VIDEO terminal (Terminated at 75
Ω
).
Fig. 5-3-3. Color Bar Signals of the Alignment Tape
1V
0.7V
0.3V
White (100%)
Y
ello
w
Cy
an
Green
Magenta
Red
Blue
Burst signal
Horizontal sync signal
0.3V
(100%)
Y
ello
w
Cy
an
Green
Magenta
Red
Blue
White
Blac
k
Color bar Pattern
Color bar signal waveform
3-1-5. Alignment Tape
The following table lists alignment tapes which are available.
Use the tape specified in the signal column for each adjustment.
If the type of tape to be used for checking operations is not specified,
use whichever type.
Use the tape specified in the signal column for each adjustment.
If the type of tape to be used for checking operations is not specified,
use whichever type.
Name
Tracking
WR5-1CP
WR5-1CP
Video frequency
characteristics
WR5-7CE
characteristics
WR5-7CE
Operation check
(SP mode)
WR5-5CSP
(SP mode)
WR5-5CSP
Operation check
(SP mode)
WR5-8CSE
(SP mode)
WR5-8CSE
Operation check
(LP mode)
WR5-4CL
(LP mode)
WR5-4CL
Operation check
(LP mode)
WR5-8CLE
(LP mode)
WR5-8CLE
AFM stereo
Operation check
WR5-9CS
Operation check
WR5-9CS
BPF adjustment
WR5-11CS
WR5-11CS
Record
-ing
mode
Standard
8 mm
Hi8
Standard
8 mm
Hi8
Standard
8 mm
Hi8
Standard
8 mm
Hi8
Tape
type
MP
ME
MP
ME
MP
ME
MP
MP
Tape
speed
SP
LP
SP
SP
LP
LP
SP
SP
Usage
Tape path
adjustment
Switching
position
adjustment
adjustment
Switching
position
adjustment
Frequency
characteristics
adjustment
characteristics
adjustment
Checking
operations
operations
AFM stereo
Checking
operations
Checking
operations
BPF
adjustment
adjustment
Tape Used
ME
Hi8 MP
MP
Recording Mode
Hi8
Standard 8
Click on the first or last page to see other CCD-TR913E / CCD-TR950E service manuals if exist.