CCD-TR820E, CCD-TR825E, CCD-TR920E, CCD-TR930 - Sony Movie Service Manual (repair manual). Page 2

Read Sony CCD-TR820E / CCD-TR825E / CCD-TR920E / CCD-TR930 Service Manual online

— 2 —
CCD-TR825E :
790 g (1 lb 11 oz) excluding the
battery pack, lithium battery, cassette
and shoulder strap
940 g (2 lb 1 oz) including the battery
pack NP-F330, lithium battery
CR2025, cassette and shoulder strap
Microphone
Stereo type
Supplied accessories
See page 3.
AC power adaptor
Power requirements
110 — 240 V AC, 50/60 Hz
Power consumption
25 W
Output voltage
DC OUT : 8.4 V, 1.9 A in operating
mode
Battery charge terminal : 8.4 V, 1.4 A
in chage mode
Application
Sony battery packs NP-F330,
NP-F530, NP-F730, NP-F930
lithium ion type
Operating temperature
32
°
F to 104
°
F (0
°
C to 40
°
C)
Storage temperature
–4
°
F to +140
°
F (–20
°
C to +60
°
C)
Dimensions (Approx.)
1
/
4
 x 1 
13
/
16 
x 6 
1
/
2
 in.
(81x45x163 mm) (w/h/d)
including projecting parts and
controls
Masss (Approx.)
1 lb 3 oz (560 g)
Design and specifications are subject
to change without notice.
Model
Destination
Classification
Remote Commander
Color System
Optical
Lens
Digital
View Finder
VTR REC
Intelligent
Standard
IR Transmitter
Time Code
Video Head
CCD-TR930
US, CND
TYPE A
RMT-708
NTSC
15X
30X
Color EVF
®
®
®
4
CCD-TR820E
AEP,UK,EE,NE,RU
TYPE B
RMT-708
PAL
15X
30X
B/W EVF
®
2
CCD-TR825E
AEP
TYPE C
RMT-717
PAL
15X
30X
B/W EVF
®
®
2
CCD-TR920E
E, AUS, JE
TYPE D
RMT-708
PAL
15X
180X
Color EVF
®
®
2
Color EVF : with LB-50,VF-111, 112 board and
with VC-190 board IC800
B/W EVF : with VF-99 board
®
 : with VC-190 board IC130
®
 : with VC-190 board CN205
®
 : with MI-29 board IC361
®
 : with MM-35 board IC701
Accessory
Shoe
Table for difference of function
ATTENTION AU COMPOSANT AYANT RAPPORT
 À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 
!
 SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE  DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY MARK 
!
 OR DOTTED LINE
WITH MARK 
!
 ON THE SCHEMATIC DIAGRAMS AND IN THE
PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE
THESE COMPONENTS WITH SONY PARTS WHOSE PART
NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUP-
PLEMENTS PUBLISHED BY SONY.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit board Repairing
Keep the temperature of the soldering iron around 270
°
C
during repairing.
Do not touch the soldering iron on the same conductor of
the circuit board (within 3 times).
Be careful not to apply force on the conductor when
soldering or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
• Canadian model is abbreviated as CND.
• East European model is abbreviated as EE.
• North European model is abbreviated as NE.
• Russian model is abbreviated as RU.
• Australian model is abbreviated as AUS.
• Tourist model is abbreviated as JE.
Page of 127
Display

Click on the first or last page to see other CCD-TR820E / CCD-TR825E / CCD-TR920E / CCD-TR930 service manuals if exist.