Read Sony CCD-TR818 / CCD-TRV58 / CCD-TRV98 Service Manual online
5-36
3-1-2. Precautions on Adjusting
1)
Connect the adjustment remote commander to CN713 of VC-
251 board or CPC connector of FP-262 flexible via CPC jig
for BX/BK (J-6082-521-A). To operate the adjustment remote
commander, connect the AC power adapter to the DC IN jack
of CPC jig for BX/BK, or connect the L series Info-LITHIUM
battery to the battery terminal of CPC jig for BX/BK.
251 board or CPC connector of FP-262 flexible via CPC jig
for BX/BK (J-6082-521-A). To operate the adjustment remote
commander, connect the AC power adapter to the DC IN jack
of CPC jig for BX/BK, or connect the L series Info-LITHIUM
battery to the battery terminal of CPC jig for BX/BK.
2)
The adjustments of this unit are performed in the VTR mode
or camera mode.
To set to the VTR mode, set the power switch to “PLAYER” or
set the “Forced VTR Power ON mode” using the adjustment
remote commander (Note3).
To set to the Camera mode, set the power switch to “CAMERA”
or set the “Forced Camera Power ON mode” using the
adjustment remote commander (Note4).
After completing adjustments, be sure to exit the “Forced VTR
Power ON Mode” or “Forced Camera Power ON Mode”.
(Note6)
or camera mode.
To set to the VTR mode, set the power switch to “PLAYER” or
set the “Forced VTR Power ON mode” using the adjustment
remote commander (Note3).
To set to the Camera mode, set the power switch to “CAMERA”
or set the “Forced Camera Power ON mode” using the
adjustment remote commander (Note4).
After completing adjustments, be sure to exit the “Forced VTR
Power ON Mode” or “Forced Camera Power ON Mode”.
(Note6)
3)
The front panel block (MI-040/041 board, microphone unit,
video light) need not be connected except during “IR transmitter
adjustment (CCD-TRV98)”. To remove, disconnect the
following connector.
video light) need not be connected except during “IR transmitter
adjustment (CCD-TRV98)”. To remove, disconnect the
following connector.
MI-040/041 board CN754 (24P 0.5mm)
4)
As removing the cabinet (R) assembly (removing CN709 of
the VC-251 board) means removing the lithium 3V power
supply (CF-1000 block/CF-077 board BT101), data such as
date, time, user-set menus will be lost. After completing
adjustments, reset these data. If the cabinet (R) assembly has
been removed, the self-diagnosis data, data on history of use
(total drum rotation time etc.) will be lost. Before removing,
note down the self-diagnosis data (data of page: 2, address: B0
to C6) and the data on history use (data of page: 2, address: A2
to AA and E0 to E2). (Refer to “5-4.Service Mode”.)
the VC-251 board) means removing the lithium 3V power
supply (CF-1000 block/CF-077 board BT101), data such as
date, time, user-set menus will be lost. After completing
adjustments, reset these data. If the cabinet (R) assembly has
been removed, the self-diagnosis data, data on history of use
(total drum rotation time etc.) will be lost. Before removing,
note down the self-diagnosis data (data of page: 2, address: B0
to C6) and the data on history use (data of page: 2, address: A2
to AA and E0 to E2). (Refer to “5-4.Service Mode”.)
5)
The cabinet (R) assembly (CF-077 board (TR model), CF-1000
block, LCD block (TRV model)) need not be connected to
operate the VTR block. When removing the cabinet (R)
assembly, disconnect the following connectors.
block, LCD block (TRV model)) need not be connected to
operate the VTR block. When removing the cabinet (R)
assembly, disconnect the following connectors.
1. VC-251 board CN709 (24P, 0.5mm)
2. VC-251 board CN701 (20P, 0.8mm) (TRV model)
2. VC-251 board CN701 (20P, 0.8mm) (TRV model)
6)
The lens block (CD-281/286 board) need not be connected. To
remove, disconnect the following connectors.
remove, disconnect the following connectors.
1. VC-251 board CN271 (14P, 0.5mm)
2. VC-251 board CN291 (24P, 0.5mm)
2. VC-251 board CN291 (24P, 0.5mm)
7)
The EVF block (VF-129/144 board) need not be connected.
To remove, disconnect the following connectors.
To remove, disconnect the following connectors.
1. VC-251 board CN715 (4P, 1.0mm) (B/W EVF model)
2. VC-251 board CN708 (20P, 0.5mm) (Color EVF model)
2. VC-251 board CN708 (20P, 0.5mm) (Color EVF model)
8)
By setting the “Forced VTR Power ON mode” or “Forced
Camera Power ON mode”, the video section can be operate
even if the control switch block (SS-1000) has been removed.
When removing the control switch block (SS-1000), disconnect
the following connector.
Camera Power ON mode”, the video section can be operate
even if the control switch block (SS-1000) has been removed.
When removing the control switch block (SS-1000), disconnect
the following connector.
VC-251 board CN711 (5P 0.8mm)
Note1:
TRV model:
CCD-TRV49/TRV49E/TRV58/TRV58E/TRV59E/TRV68/
TRV78/TRV78E/TRV88/TRV98/TRV98E
TRV78/TRV78E/TRV88/TRV98/TRV98E
TR model:
CCD-TR618/TR618E/TR718E/TR728E/TR818
Color EVF model:
CCD-TR818
B/W EVF model:
CCD-TR618/TR618E/TR718E/TR728E/TRV49/TRV49E/
TRV58/TRV58E/TRV59E/TRV68/TRV78/TRV78E/TRV88/
TRV98/TRV98E
TRV58/TRV58E/TRV59E/TRV68/TRV78/TRV78E/TRV88/
TRV98/TRV98E
Note2:
MI-040 board, CF-1000 block, CD-281 board: TRV model
MI-041 board, CF-077 board, CD-286 board: TR model
VF-129 board: B/W EVF model
VF-141 board: Color EVF model
MI-041 board, CF-077 board, CD-286 board: TR model
VF-129 board: B/W EVF model
VF-141 board: Color EVF model
Note3:
Setting the “Forced VTR Power ON” mode (VTR mode)
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02, and press the PAUSE
button.
The above procedure will enable the VTR power to be turned on
with the control switch block (SS-1000) removed.
After completing adjustments, be sure to exit the “Forced VTR
Power ON mode”.
with the control switch block (SS-1000) removed.
After completing adjustments, be sure to exit the “Forced VTR
Power ON mode”.
Note4:
Setting the “Forced Camera Power ON” mode (Camera mode)
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control switch block (SS-1000) removed.
After completing adjustments, be sure to exit the “Forced Camera
Power ON mode”.
on with the control switch block (SS-1000) removed.
After completing adjustments, be sure to exit the “Forced Camera
Power ON mode”.
Note5:
Exiting the “Forced Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Click on the first or last page to see other CCD-TR818 / CCD-TRV58 / CCD-TRV98 service manuals if exist.