Read Sony CCD-TR818 / CCD-TRV58 / CCD-TRV98 Service Manual online
5-30
PD-131 board
1-6.
LCD SYSTEM ADJUSTMENT
(CCD-TRV49/TRV49E/TRV58/TRV58E/TRV59E/
TRV68/TRV78/TRV78E/TRV88/TRV98/TRV98E)
(CCD-TRV49/TRV49E/TRV58/TRV58E/TRV59E/
TRV68/TRV78/TRV78E/TRV88/TRV98/TRV98E)
Note 1:
The back light (fluorescent tube) is driven by a high voltage AC
power supply. Therefore, do not touch the back light holder to
avoid electrical shock.
power supply. Therefore, do not touch the back light holder to
avoid electrical shock.
Note 2:
When replacing the LCD unit, be careful to prevent damages
caused by static electricity.
caused by static electricity.
Note 3:
Set the LCD BRIGHT (Menu display) to the center.
Set the LCD COLOR (Menu display) to the center.
Set the LCD COLOR (Menu display) to the center.
Note 4:
Connect the adjustment remote commander to CN713 of VC-251
board or CPC connector of FP-262 flexible via CPC jig for BX/
BK (J-6082-521-A). To operate the adjustment remote commander,
connect the AC power adapter (8.4Vdc) to the DC IN jack of CPC
jig for BX/BK, or connect the L series Info-LITHIUM battery to
the battery terminal of CPC jig for BX/BK.
board or CPC connector of FP-262 flexible via CPC jig for BX/
BK (J-6082-521-A). To operate the adjustment remote commander,
connect the AC power adapter (8.4Vdc) to the DC IN jack of CPC
jig for BX/BK, or connect the L series Info-LITHIUM battery to
the battery terminal of CPC jig for BX/BK.
[Adjusting connector]
Most of the measuring points for adjusting the LCD system are
concentrated in CN5502 of the PD-131 board. Connect the
measuring instruments via the multi CPC jig (J-6082-311-A). The
following table shows the Pin No. and signal name of CN5502.
Most of the measuring points for adjusting the LCD system are
concentrated in CN5502 of the PD-131 board. Connect the
measuring instruments via the multi CPC jig (J-6082-311-A). The
following table shows the Pin No. and signal name of CN5502.
1. LCD Type Check
By measuring the resistor value between Pin 6 of CN5502 and
GND, the type of LCD can be discriminated.
GND, the type of LCD can be discriminated.
Table. 5-1-8.
Pin No.
1
3
5
7
9
Signal Name
VB
VG
VR
C-SYNC/XHD
GND
Pin No.
2
4
6
8
10
Signal Name
XVD OUT
PANEL COM/PSIG
PANEL ID
XHD OUT
GND
Resistor
value
1.0k
Ω
4.7k
Ω
5.6k
Ω
Table. 5-1-9.
LCD type
2.5 LCD TYPE S (61k)
3.0 LCD TYPE S (123k)
3.5 LCD TYPE S (123k)
CCD-
TRV49,TRV49E,TRV58,
TRV58E,TRV59E,
TRV68,TRV78,TRV78E
TRV58E,TRV59E,
TRV68,TRV78,TRV78E
TRV88
TRV98,TRV98E
1
2
10
9
CN5502
Click on the first or last page to see other CCD-TR818 / CCD-TRV58 / CCD-TRV98 service manuals if exist.