CCD-TR648E, CCD-TR748E, CCD-TR848 (serv.man3) - Sony Movie Service Manual (repair manual). Page 7

— 7 —

5-5

For details of how remove the cabinet and boards, refer to “2.

DISASSEMBLY”.

When performing only the adjustments, the lens block and boards

need not be disassembled.

1) Connect the equipment for adjustments according to Fig. 5-1-4.
2) Connect the adjustment remote commander to CN713 of VC-

272 board via the I/F unit for LANC control (J-6082-521-A)
and CPC jig connector (J-6082-539-A). To operate the
adjustment remote commander, connect the AC power adapter
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control. (Fig. 5-1-3.)

3) The front panel block (SI-033 board, microphone unit, video

light) need not be assembled except during the steady shot
operation check.

Remove the CPC lid

CPC jig connector

CPC jig

CN713

Conductor side

16

1

 : 

Changed portion.    

 : 

Added portion.

5-6

AC power adaptor
(8.4Vdc)
AC-L10 or
AC-VQ800 etc

Terminated at 75 

Ω

Vector scope

Adjustment
remote commander

L series
Info LITHIUM
Battery
(7.2Vdc)

Color monitor

LANC
jack

I/F unit for LANC control (J-6082-521-A)

Must be connected

CPC jig connector
(J-6082-539-A)

Use either a AC power adaptor or a Info-LITHIUM battery as the power supply of the I/F unit for LANC control.