CCD-TR413PK, CCD-TR414PK, CCD-TR57, CCD-TR67, CCD-TR87, CCD-TR917, CCD-TR940, CCD-TR940PK - Sony Movie Service Manual (repair manual). Page 2

Read Sony CCD-TR413PK / CCD-TR414PK / CCD-TR57 / CCD-TR67 / CCD-TR87 / CCD-TR917 / CCD-TR940 / CCD-TR940PK Service Manual online

Mass (Approx.)
CCD-TR57 : 1 lb 11 oz (780 g)
CCD-TR67/TR87/TR413PK/TR414PK/
TR917/TR940/TR940PK : 1 lb 11 oz
(790 g)
excluding the battery pack, lithium
battery, cassette and shoulder strap
CCD-TR57 : 2 lb (920 g)
CCD-TR67/TR87/TR413PK/TR414PK/
TR917/TR940/TR940PK : 2 lb (930 g)
including the battery pack NP-F330,
lithium battery CR2025, cassette and
shoulder strap
Microphone
CCD-TR57/TR67/TR87/TR413PK/
TR414PK : Monaural type
CCD-TR917/TR940/TR940PK : Stereo
type
Supplied accessories
See page 4.
AC power adaptor
Power requirements
100 -240 V AC, 50/60 Hz
Power consumption
23 W
Output voltage
DC OUT: 8.4 V, 1.5 A in operating
mode
Operating temperature
32
°
F to 104
°
F(0
°
C to 40
°
C)
Storage temperature
-4
°
F to +140
°
F(-20
°
C to +60
°
C)
Dimensions (Approx.)
5 x 1 9/16 x 2 1/2 in. (125 x 39 x 62
mm)(w/h/d) excluding projecting parts
Mass (Approx.)
9.8 oz (280 g) excluding power cord
Design and specifications are subject to
change without notice.
FOR CAMERA COLOR REPRODUCTION ADJUSTMENT
Take a copy CAMERA COLOR REPRODUCTION FRAME
and Parts reference sheets with a clear sheet for use.
For 510H model
CCD-TR57/TR67/TR413PK
For 760H model
CCD-TR87/TR414PK/TR917/TR940/TR940PK
– 2 –
ATTENTION AU COMPOSANT AYANT RAPPORT
 À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 
!
 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE  DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
SAFETY-RELATED COMPONENT WARNING !!
COMPONENTS IDENTIFIED BY MARK 
!
 OR DOTTED LINE WITH
MARK 
!
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to
the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and recommend
their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit board Repairing
• Keep the temperature of the soldering iron around 270
°
C during
repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
Page of 127
Display

Click on the first or last page to see other CCD-TR413PK / CCD-TR414PK / CCD-TR57 / CCD-TR67 / CCD-TR87 / CCD-TR917 / CCD-TR940 / CCD-TR940PK service manuals if exist.