CCD-TR317, CCD-TR517, CCD-TRV17, CCD-TRV37, CCD-TRV47, CCD-TRV57, CCD-TRV57P, CCD-TRV67, CCD-TRV87, CCD-TRV87P - Sony Movie Service Manual (repair manual). Page 127

5-9

If “Initializing the D, E, F, 7 Page Data” is performed, all data of
the D page, E page, F page and 7 page will be initialized. (It is
impossible to initialize a single page.)

If the D, E, F, 7 page data has been initialized, “Modification of D,
E, F, 7 Page Data” and all adjustments need to be performed again.

Adjusting page

D

Adjusting Address

00 to 85

Adjusting page

F

Adjusting Address

00 to FF

Adjusting page

E

Adjusting Address

00 to FF

Adjusting page

7

Adjusting Address

00 to FF

Initializing Method:
1)

Select page: 0, address: 01, and set data: 01.

2)

Select page: 6, address: 00, and set data: 55.

3)

Select page: 6, address: 01, set data: 55, and press the PAUSE
button of the adjustment remote commander.

4)

Select page: 6, address: 02, and check that the data is 01.

5)

Select page: 2, address: 00, and set data: 29.

6)

Select page: 2, address: 01, set data: 29, and press the PAUSE
button.

7)

Perform “Modification of D, E, F, 7 Page Data”.

If the D, E, F, 7 page data has been initialized, change the data of
the “Fixed data-2” address shown in the following tables by manual
input.

Modifying Method:
1)

Before changing the data, select page: 0, address: 01, and set
data: 01.

2)

New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.

If copy the data built in the different model, the camcorder may
not operate.

3)

When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.

4)

Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.

Processing after Completing Modification of D, E, F, 7 Page
data
1)

Select page: 2, address: 00, and set data: 29.

2)

Select page: 2, address: 01, and set data: 29, and press the
PAUSE button of the adjustment remote commander.

If the following symptoms occur after completing of the
“Modification of D, E, F, 7 page data”, check that the data of the
“Fixed data-2” addresses of D page are same as those of the same
model of the same destination.
1) The battery end mark on the LCD or viewfinder screen is flashing.
2) The power is shut off so that unit cannot operate.

Fixed data-1: Initialized data. (Refer to “1. Initializing the D, E, F,
7 Page Data”.)
Fixed data-2: Modified data. (Refer to “2. Modification of D, E, F,
7 Page Data”.)

00 to 0F

10

11

12

13

14

15

16

17

18

19

1A

1B

1C

1D

1E

1F

20

21

22

23

24

25

26

27

28

29

2A

2B

2C

2D

2E

2F

30

31

32

33

34

35

36

37

38

39

3A

3B

3C

3D

3E

3F

00

Test mode

Fixed data-1

(Initialized data)

Fixed data-2

(Modified data. Copy the data built in

the same model.)

Fixed data-1

Fixed data-2

(Modified data. Copy the data built in

the same model.)

Fixed data-1

Fixed data-2

Fixed data-1

(Initialized data)

Fixed data-2

(Modified data. Copy the data built in

the same model.)

Fixed data-1

(Initialized data)