Read Sony SDM-X202 (serv.man2) Service Manual online
SDM-X202(E)
1-1
SECTION 1
DISASSEMBLY
1-1. REAR COVER AND STAND ASSY REMOVAL
NOTE:
There are fourteen claws to catch the vessel inside of the rear cover.
When removing the rear cover, you have to release these claws in the following order.
Four claws
When removing the rear cover, you have to release these claws in the following order.
Four claws
a
at lower side, three claws,
b
on both sides (release the claw first at lower side), and lastly
release four claws,
c
at upper side.
1
Rear panel
9
Rear center cover
7
Stand assy
6
Four screws (+PSW 4x10)
8
Screw (+BVTT 4x8)
3
Screw
(+BVTT 4x8)
4
Two screws
(+BVTT 4x14)
2
Four screws
(+PSW 4x10)
5
Rear cover
Sheet protection
b
Three claws
a
Four claws
c
Four claws
Click on the first or last page to see other SDM-X202 (serv.man2) service manuals if exist.