Read Sony SDM-S51 Service Manual online
SDM-S51(E)
2-6
2-5. W/B ALIGNMENT PROCEDURE
A. Measurement Condition:
- Measurement point: Center of screen
- Measurement distance: 50 cm
- Measurement Angle: 90Åã
B. Measurement equipment:
- Color Analyzer: Minolta CS-1000 or equivalent
- Signal Generator: VG-828D or equivalent
C. Alignment Procedure:
Alignment Procedure
Parameter Setting & Specification
1. Aging: more than 30 minutes
Burn-in mode: press "BRT"+"OK" then "Power ON"
2. Enter to "Service Mode"
Service mode: press "
"+"
" then "Power ON"
3. RGB reset
MaintainConfigurationRGB Reset
4. Initial Data Setting:
S51:
S81:
a. Brightness: 50
a. Brightness: 50
b. Contrast: 70
b. Contrast: 70
c. Sub-BRT (R/G/B): 128
c. Sub-BRT (R/G/B): 26
d. Sub-CONT (R/G/B): 50
d. Sub-CONT (R/G/B): 128
5. Input gray raster pattern
35 IRE (1024*768, 60K/75Hz)
30 IRE (1280*1024, 80K/75Hz)
6. Adjust White Balance (9300K, 6500K & 5000K) and Luminance
(10 nits @ SONY CS-1000) by Sub-BRT
(10 nits @ SONY CS-1000) by Sub-BRT
9300K
6500K
5000K
Tolerance
x
0.2838
0.3132
0.3450 }0.003
Remark: In normally, adjust G for Luminance (Y), adjust R for x and adjust
B for y.
B for y.
y
0.2981
0.3297
0.3580 }0.003
Y
10
10
10 }0.7
7. All mode recall
Select OSD
"ALL
RESET"
function
"ALL
RESET"
function
All mode recall:
press"CONTRA
ST"+"OK" then
"Power ON"
press"CONTRA
ST"+"OK" then
"Power ON"
Click on the first or last page to see other SDM-S51 service manuals if exist.