SDM-N50 - Sony Monitor Service Manual (repair manual). Page 10

1-4

10

You can listen to music, sounds, and other audio files using the 
stereo speaker of your monitor. 
Connect the AUDIO IN jack to the audio output jack of your 
computer or other audio equipment using the supplied audio cord 
(stereo miniplug).

Volume adjustments are made using a separate VOLUME menu 
from the main menu (page 11).

2

The VOLUME menu appears on the screen.

2

The menu automatically disappears after about 3 seconds.

You can listen to the audio signals from your computer or other 
audio equipment using headphones. Connect your headphones to 
the headphones jack. The speaker turns off when headphones are 
connected to the headphones jack. Adjust the volume of the 
headphones using the VOLUME menu.

• You cannot adjust the volume when displaying the main menu on the 

screen.

• When your monitor is in low power consumption mode or power 

saving mode, no sound comes from the speaker.

You can connect two computers to this monitor using the INPUT 
1 and INPUT 2 connectors. To select one of the two computers, 
use the INPUT button.

The input signal and corresponding input indicator, “1” (INPUT 
1) or “2” (INPUT 2) change each time you press this button.

• You cannot select the input signal when displaying the main menu on 

the screen.

• If no signal is input to the selected connector, NO INPUT SIGNAL 

appears on the screen. After a few seconds, the monitor enters the 
power saving mode. If this happens, select the other connector using the 
INPUT button.

VOL UME

4 0

INPUT

OK

1
2

11

You can make numerous adjustments to your monitor using the 
on-screen menu.

Press the MENU button to display the main menu on your screen. 
See page 12 for more information on using the MENU button.

Use the 

M(+)/m(–) and OK buttons to select one of the following 

menus. See page 12 for more information on using the
M(+)/m(–) and OK buttons.

Connect the monitor and the computer, and turn them on. 
Wait for at least 30 minutes before making adjustments for the 
best result.

1

Select the PHASE menu to 
adjust the phase when the 
characters or pictures appear 
fuzzy throughout the entire 
screen. Adjust the phase after 
adjusting the pitch.

2

Select the PITCH menu to 
adjust the pitch when the 
characters or pictures are 
unclear in some areas of the 
screen.

3

Select the H CENTER menu 
to adjust the picture’s 
horizontal centering.

MENU

PHA SE

1 6

EX I T

PHA S E

0

EX I T

P I T C H

5 0

EX I T

H C ENT E R

4

Select the V CENTER menu 
to adjust the picture’s vertical 
centering.

5

Select the ZOOM menu to 
adjust the picture’s sharpness 
according to the input 
signal’s aspect ratio or 
resolution.

6

Select the COLOR menu to 
adjust the color temperature 
of the picture. This adjusts 
the tone of the screen.

7

Select the MENU 
POSITION to change the on-
screen menu position.

8

Select the RESET menu to 
reset the adjustments.

9

Select 

m (option) menu to 

adjust the monitor’s options. 
The options include:

• WIDE STEREO
• BASS BOOST
• BACKLIGHT
• LIGHT SENSOR
• POWER SAVE
• USER SENSOR
• LANGUAGE
• MENU LOCK

2 5

EX I T

V C ENT E R

ON
OF F

ZOOM

EX I T

9 3 0 0 K

0 K

6 5 0
5 0 0 0 K

USER

A

L D J U ST

COLOR

EX I T

MEN

N

U POS I

I O

T

EX I T

S CREEN

A L L

RESE T

RESE T

RESE T

EX I T

1
2

O

F F

W I D E

S T E R E O

EX I T