Read Sony GDM-500PS / GDM-500PST / GDM-500PST9 Service Manual online
GDM-500PS/500PST/500PST9
– 3 –
POWER SAVING FUNCTION
This monitor meets the power-saving guidelines set by VESA and
Energy Star, as well as the more stringent NUTEK .
If the monitor is connected to a computer or video graphics board
that is VESA DPMS (Display Power Management Signaling)
compliant, the monitor will automatically reduce power con-
sumption in three stages as shown below.
You can set the delay time before the monitor enters the power
saving mode using the OSD. Set the time according to “Setting
the power saving delay time” on page 1-6.
Energy Star, as well as the more stringent NUTEK .
If the monitor is connected to a computer or video graphics board
that is VESA DPMS (Display Power Management Signaling)
compliant, the monitor will automatically reduce power con-
sumption in three stages as shown below.
You can set the delay time before the monitor enters the power
saving mode using the OSD. Set the time according to “Setting
the power saving delay time” on page 1-6.
Note
If no video signal is input to the monitor, the “NO INPUT SIG-
NAL” message (page 1-8) appears. After the delay time has
passed, the power saving function automatically puts the monitor
into the active-off mode and the u indicator lights up orange. Once
the horizontal and vertical sync signals are detected, the monitor
automatically resumes its normal operation mode.
If no video signal is input to the monitor, the “NO INPUT SIG-
NAL” message (page 1-8) appears. After the delay time has
passed, the power saving function automatically puts the monitor
into the active-off mode and the u indicator lights up orange. Once
the horizontal and vertical sync signals are detected, the monitor
automatically resumes its normal operation mode.
1
2
3
4
5
Power consumption
mode
mode
Normal operation
Standby (1st mode)
Suspend (2nd mode)
Active-off (3rd mode)
Power-off
Power
consumption
consumption
≤
160 W
≤
100 W
≤
15 W
≤
5 W
0 W
Horizontal
sync signal
sync signal
present
absent
present
absent
—
Vertical
sync signal
sync signal
present
present
absent
absent
—
Screen
active
blank
blank
blank
—
u
indicator
Green
Green and orange
alternate
alternate
Green and orange
alternate
alternate
Orange
Off
Recovery time
—
Approx. 3 sec.
Approx. 3 sec.
Approx. 10 sec.
—
Failre
+B failure
Horizontal / Vertical Deflection
failure, Thermal protector
failure, Thermal protector
ABL protector
HV failure
Aging / Self Test
Power LED
Orange
→
Off
(0.5 sec)
(0.5 sec)
Orange
→
Off
(1.5 sec)
(0.5 sec)
Orange
→
Off
(0.5 sec)
(1.5 sec)
Orange
→
Off
→
Orange
→
Off
(0.25 sec)
(0.5 sec)
(0.25 sec)
(1.25 sec)
Orange
→
Off
→
Green
→
Off
(0.5 sec)
(0.5 sec)
(0.5 sec)
(0.5 sec)
Aging Mode (Video Aging) : During Power Save, press “MENU” key for longer than 2 second.
Self Test (OSD Color Bar)
: During Power Save, press “CONTRAST” + (
/) key for longer than 2 second.
Reliability Check Mode
: During Power Save, press “CONTRAST” – (
?) key for longer than 2 second.
DIAGNOSIS
Click on the first or last page to see other GDM-500PS / GDM-500PST / GDM-500PST9 service manuals if exist.