Read Sony DHC-FL3 / GDM-C520 / GDM-C520K / HCD-FL3 Service Manual online
4
Connecting the Color Reference Sensor to your Computer
Attaching the Display Hood to your GDM-C520 Display
1
Unfold the hood.
2
Attach the hook and loop pads to the underside of the display hood, as shown above.
3
Remove the liners protecting the adhesive on each hook and loop tab.
4
Wrap the hood around the display. Make sure that the hood is evenly aligned.
5
Fold the adhesive tabs inward the display, pressing firmly to ensure proper adhesion of the tabs to the underside of the display.
USB jack
Color Reference Sensor
1
USB port
1
Connect the USB end of the Color Reference Sensor to an open USB port on your
computer, or connect it through a peripheral device such as a keyboard or USB hub.
computer, or connect it through a peripheral device such as a keyboard or USB hub.
Note: Make sure that the sensor can be placed easily over the center
of your display screen, without stretching the sensor's cord.
of your display screen, without stretching the sensor's cord.
Hook and loop tabs
INPUT 1
2
PICTURE EFFECT
MENU
OK
INPUT 1
2
PICTURE EFFECT
MENU
OK
1
3
4
5
2
Click on the first or last page to see other DHC-FL3 / GDM-C520 / GDM-C520K / HCD-FL3 service manuals if exist.