CPD-G420 (serv.man4) - Sony Monitor Service Manual (repair manual). Page 57

Read Sony CPD-G420 (serv.man4) Service Manual online

8
Connecting Universal Serial Bus 
(USB) compliant peripherals
Your monitor has one upstream and four downstream USB 
connectors. They provide a fast and easy way to connect USB 
compliant peripheral devices (such as keyboards, mice, printers 
and scanners) to your computer using a standardized USB cable.
To use your monitor as a hub for your peripheral devices, connect 
the USBs as illustrated below.
1
Turn on the monitor and computer.
2
Connect your computer to the square upstream 
connector using the supplied USB cable.
For customers using Windows
If a message appears on your screen, follow the on-screen instructions 
and select Generic USB Hub as the default setting.
3
Connect your USB compliant peripheral devices to 
the rectangular downstream USB connectors.
Notes
• Not all computers and/or operating systems support USB 
configurations. Check your computer’s instruction manual to see if you 
can connect USB devices.
• In most cases, USB driver software needs to be installed on the host 
computer. Refer to the peripheral device’s instruction manual for 
further details.
• The monitor functions as a USB hub as long as the monitor is either 
“on” or in power saving mode.
• If you connect a keyboard or mouse to the USB connectors and then 
boot your computer for the first time, the peripheral devices may not 
function. First connect the keyboard and mouse directly to the 
computer and set up the USB compliant devices. Then connect them to 
this monitor.
Selecting the on-screen menu 
language (LANGUAGE)
English, French, German, Spanish, Italian, Dutch, Swedish, 
Russian and Japanese versions of the on-screen menus are 
available. The default setting is English.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight 
OPTION and press the control button. 
3
Move the control button up or down to highlight 
LANGUAGE and press the control button.
4
Move the control button up or down until the desired 
language appears on the screen. Then press the 
control button to select the language.
Each time you move the control button up or down, the 
language can be selected appears cyclically.
• ENGLISH
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
• NEDERLANDS: Dutch
• SVENSKA: Swedish
: Russian
: Japanese 
To close the menu
Press the MENU button. If no buttons are pressed, the menu closes 
automatically after about 45 seconds.
To reset to English
Select ENGLISH in step 4 above.
to USB compliant 
peripheral devices
to a USB compliant 
computer
MENU
CONTRAST
CONTRAST
50
/
I
BR GHT
1 0 2 4 x 7 6 8   /     8 5 H z
b
OK
MENU
E
OPT ON
I
CONTROL
LOCK
OFF
ON
X I T :
b
b
OK
OK
OPT ON
I
LANGUAGE
ENGL I SH
MENU
EX I T :
b
b
OK
Page of 73
Display

Click on the first or last page to see other CPD-G420 (serv.man4) service manuals if exist.