Read Sony CPD-G220R / CPD-G220S Service Manual online
— 11 —
CPD-G220R/G220S
3-7. DIGITAL CONVERGENCE ADJUSTMENT
Convergence (Low) Mode
1. Adjust the H.STAT and V.STAT with "HSTAT" and "VSTAT".
2. Change "CONV_SW" to "7".
1. Adjust the H.STAT and V.STAT with "HSTAT" and "VSTAT".
2. Change "CONV_SW" to "7".
A.
Horizontal
Convergence
Adjust each misconvergence point in sequence.
B. Vertical Convergence
Adjust each misconvergence point in sequence.
2. Repeat the procedure of A and B so that the convergence of the
entire screen is within the specifi cation.
Convergence (High) Mode
1. Adjust the H.STAT and V.STAT with "HSTAT-HI" and "VSTAT-HI".
1. Adjust the H.STAT and V.STAT with "HSTAT-HI" and "VSTAT-HI".
A.
Horizontal
Convergence
Adjust each misconvergence point in sequence.
B.
Vertical
Convergence
Adjust each misconvergence point in sequence.
2. Repeat the procedure of A and B so that the convergence of the
entire screen is within the specifi cation.
3. Change "MCR2" to "170".
3-8. CONVERGENCE SPECIFICATION
A Zone:
Primary Mode Others
H: < 0.25mm H: < 0.3mm
V: < 0.25mm V: < 0.3mm
Primary Mode Others
H: < 0.25mm H: < 0.3mm
V: < 0.25mm V: < 0.3mm
B Zone:
Primary Mode Others
H: < 0.3mm H: < 0.4mm
V: < 0.3mm V: < 0.4mm
Primary Mode Others
H: < 0.3mm H: < 0.4mm
V: < 0.3mm V: < 0.4mm
Click on the first or last page to see other CPD-G220R / CPD-G220S service manuals if exist.