Read Sony CPD-E450 Service Manual online
— 4 —
CPD-E450
POWER MANAGEMENT
The power saving mode complies with the VESA Display Power Management Signaling standard. Each state of power management shall be
activated by the host computer terminating the appropriate sync signals. Blanking the video must precede termination of the sync signals. The
elapsed time counter shall also be controlled by the host computer. Reactivation of the monitor shall be accomplished from the host computer by
re-establishing the normal sync signal.
activated by the host computer terminating the appropriate sync signals. Blanking the video must precede termination of the sync signals. The
elapsed time counter shall also be controlled by the host computer. Reactivation of the monitor shall be accomplished from the host computer by
re-establishing the normal sync signal.
TIMING SPECIFICATION
SELF DIAGNOSIS FUNCTION
When a failure occurs, the STANDBY/TIMER lamp will fl ash a set number of times to indicate the possible cause of the problem. If there is more
than one error, the lamp will identify the fi rst of the problem areas.
than one error, the lamp will identify the fi rst of the problem areas.
Status
Area of Failure
LED Indication
1
Failure 1
HV or +B
Amber (0.5 second)/Off (0.5 second)
2
Failure 2
H Stop, V Stop or S Connection Failure
Amber (1.5 second)/Off (0.5 second)
3
Failure 3
ABL Protector
Amber (0.5 second)/Off (1.5 second)
4
Aging/Self Test
Amber (0.5 second)/Off (0.5 second)/
Green (0.5 second)/Off (0.5 second)
5
Out of Scan Range
Green (OSD indication)
Aging Mode (Video Aging)
: During Power Save, press MENU button for longer than 2 seconds.
Monitor Information and RGB bar : During Power Save, press CONT+ button for longer than 2 seconds.
ALL White
: During Power Save, press CONT- button for longer than 2 seconds.
MODE
Primary Mode
MODE AT PRODUCTION
MODE 1
MODE 2
MODE 3
MODE 4
MODE 5
MODE 6
MODE 7
MODE 8
MODE 9
RESOLUTION
640 X 480
800 X 600
1280 X 1024
1024 X 768
832 X 624
1600 X 1200
1152 X 870
CLOCK
25.175 MHz
56.250 MHz
157.500 MHz
94.500 MHz
57.283 MHz
202.500 MHz
100.000 MHz
-- HORIZONTAL --
H-FREQ
31.469 kHz
53.674 kHz
91.146 kHz
68.677 kHz
49.725 kHz
93.750 kHz
68.681 kHz
µsec
µsec
µsec
µsec
µsec
µsec
µsec
H. TOTAL
31.778
18.631
10.971
14.561
20.111
10.667
14.560
H. BLK
6.356
4.409
2.844
3.725
5.586
2.765
3.040
H. FP
0.636
0.569
0.406
0.508
0.559
0.316
0.320
H. SYNC
3.813
1.138
1.016
1.016
1.117
0.948
1.280
H. BP
1.907
2.702
1.422
2.201
3.910
1.501
1.440
H. ACTIV
25.422
14.222
8.127
10.836
14.524
7.901
11.520
-- VERTICAL --
V. FREQ (HZ)
59.940 Hz
85.061 Hz
85.024 Hz
84.997 Hz
74.550 Hz
75.000 Hz
75.062 Hz
lines
lines
lines
lines
lines
lines
lines
V. TOTAL
525
631
1072
808
667
1250
915
V. BLK
45
31
48
40
43
50
45
V. FP
10
2
3
2
1
1
3
1
1
3
1
3
V. SYNC
3
3
3
3
V. BP
33
27
44
36
39
46
39
V. ACTIV
480
600
1024
768
624
1200
870
-- SYNC --
INT(G)
NO
NO
NO
NO
NO
NO
NO
EXT (H/V) /POLARITY
YES -/-
NO +/+
YES +/+
YES +/+
YES -/-
YES +/+
YES -/-
EXT (CS) /POLARITY
NO
NO
NO
NO
NO
NO
NO
INT/NON INT
NON INT
NON INT
NON INT
NON INT
NON INT
720 X 400
28.322 MHz
31.469 kHz
µsec
31.777
6.355
0.636
3.813
1.907
25.422
70.087 Hz
lines
449
49
12
35
400
NO
YES -/+
NO
NON INT
640 X 480
36.000 MHz
43.269 kHz
µsec
23.111
5.333
1.556
1.556
2.222
17.778
85.008 Hz
lines
509
29
1
25
480
NO
YES -/-
NO
NON INT
NON INT
NON INT
Power consumption Screen Horizontal Vertical Power Recovery time
indicator
mode (video) sync signal sync signal consumption
1 Normal operation active yes yes < 130 W -- Green
2 Active-off (3rd mode) blank no* no* < 3 W Approx. 10 sec. Orange
3 Power-off -- -- -- 0 W (approx) -- Off
* In this mode, the signal will appear in one of three ways: The Horizontal Sync Signal alone off, the Vertical Sync Signal
alone off, or both signals off.
alone off, or both signals off.
Click on the first or last page to see other CPD-E450 service manuals if exist.