CPD-E250 - Sony Monitor Service Manual (repair manual). Page 45

Read Sony CPD-E250 Service Manual online

8
\\Techno-1\production\P_Customers\Sony_DSA\408964001\GB\01GB03BAS-AEP.fm
masterpage:Left
CPD-E250 CPD-E450
4-089-640-11
If thin lines appear on the screen 
(damper wires)
These lines do not indicate a malfunction; they are a normal 
effect of the Trinitron picture tube with this monitor. These are 
shadows from the damper wires used to stabilize the aperture 
grille. The aperture grille is the essential element that makes a 
Trinitron picture tube unique by allowing more light to reach the 
screen, resulting in a brighter, more detailed picture.
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is 
a problem with your monitor or computer, the screen will go 
blank and the 
1 (power) indicator will either light up green or 
flash orange. If the 
1 (power) indicator is lit in orange, the 
computer is in power saving mode. Try pressing any key on the 
keyboard or moving the mouse.
If the 1 (power) indicator is green
1
Disconnect the video input cable or turn off the 
connected computer.
2
Press the 
1 (power) button twice to turn the monitor 
off and then on.
3
Move the joystick 
, for 2 seconds.
If all 4 color bars appear (white, red, green, blue), the monitor is 
working properly. Reconnect the video input cables. Adjust the 
brightness and contrast, and check the monitor. If the fault still 
exists, check your computer.
If the color bars do not appear, there is a potential monitor failure. 
Inform your authorized Sony dealer of the monitor’s condition.
If the 1 (power) indicator is flashing orange
Turn the monitor OFF and then ON.
If the 
1 (power) indicator lights up green, the monitor is working 
properly.
If the 
1 (power) indicator is still flashing, there is a potential 
monitor failure. Count the number of seconds between orange 
flashes of the 
1 (power) indicator and inform your authorized 
Sony dealer of the monitor’s condition. Be sure to note the model 
name and serial number of your monitor. Also note the make and 
model of your computer and graphics board.
* Recommended horizontal and vertical timing condition
• Horizontal sync width should be more than 1.0 µsec.
• Horizontal blanking width should be more than 3.0 µsec.
• Vertical blanking width should be more than 500 µsec.
** If the input signal is Generalized Timing Formula (GTF) 
compliant, the GTF feature of the monitor will automatically 
provide an optimal image for the screen.
Design and specifications are subject to change without notice.
Specifications
CPD-E250
CRT
0.24 mm aperture grille pitch (center) 
17 inches measured diagonally 
90-degree deflection
FD Trinitron
Viewable image size
Approx. 328 
× 242 mm (w/h) 
(13  
× 9 
5
/
8
 inches) 
Viewing image
408 mm (16.1 inches)
Resolution
Maximum
Horizontal: 1600 dots
Vertical: 1200 lines
Recommended
Horizontal: 1024 dots
Vertical: 768 lines
Input Signal levels
Video Signal:
Analog RGB: 0.7 Vp-p (positive), 75
SYNC Signal:
H/V separate or composite sync:
TTL 2.2k
Ω  Polarity free
Sync on Green: 0.3 Vp-p (negative)
Standard image area
Approx. 312 
× 234 mm (w/h) 
(12 
3
/
8
× 9 
1
/
4
 inches) 
Deflection frequency*
Horizontal: 30 to 96 kHz
Vertical: 48 to 170 Hz
AC input voltage/current 
100 – 240 V, 50 – 60 Hz, 
Max. 1.7 A – 0.9 A
Power consumption
≤ 115 W
Operating temperature
10 ºC to 40 ºC
Dimensions
Approx. 402 
× 418 × 421 mm (w/h/d) 
(15 
7
/
8
× 16 
1
/
2
 × 16 
5
/
8
 inches)
Mass (Monitor weight)
Approx. 19 kg (41.9 lbs)
Plug and Play
DDC2B/DDC2Bi, 
GTF**
Supplied accessories
Power cord (1)
Warranty card (1)
This instruction manual
CPD-E450
CRT
0.24 mm aperture grille pitch (center) 
90-degree deflection
FD Trinitron 
19 inches measured diagonally
Viewable image size
Approx. 365 
× 274 mm (w/h) 
(14
3
/
8
× 10 
7
/
8
 inches) 
Viewing image
457 mm (18.01 inches)
Resolution
Maximum
Horizontal: 1920 dots
Vertical: 1440 lines
Recommended
Horizontal: 1280 dots
Vertical: 1024 lines
Input Signal levels
Video Signal:
Analog RGB: 0.7 Vp-p (positive), 75
SYNC Signal:
H/V separate or composite sync:
TTL 2.2k
Ω  Polarity free
Sync on Green: 0.3 Vp-p (negative)
Standard image area
Approx. 352 
× 264 mm (w/h) 
(13 
7
/
8
× 10 
1
/
2
 inches)
Deflection frequency*
Horizontal: 30 to 96 kHz
Vertical: 48 to 170 Hz
AC input voltage/current 
100 – 240 V, 50 – 60 Hz, 
Max. 2.0 A – 1.1 A 
Power consumption
≤ 130 W
Operating temperature
1
0 ºC to 40 ºC
Dimensions
Approx. 451 
× 471 × 461 mm (w/h/d)
(17 
7
/
8
× 18 
5
/
8
× 18 
1
/
4
 inches)
Mass (Monitor weight)
Approx. 25.5 kg (56.1 lbs)
Plug and Play
DDC2B/DDC2Bi, 
GTF**
Supplied accessories
Power cord (1)
Warranty card (1)
This instruction manual (1)
Damper 
wires
01GB03BAS-AEP.fm  Page 8  Wednesday, June 19, 2002  4:22 PM
Page of 47
Display

Click on the first or last page to see other CPD-E250 service manuals if exist.