Read Sony CPD-E240 Service Manual online
— 7 —
CPD-E240
1-1. CABINET REMOVAL
SECTION 1: DISASSEMBLY
Remove (2) Screws (+BVTP 4 x 16)
Release side claw - Insert the tip of a ß athead
screwdriver approximately 0.25" to unlock the
claw.
claw.
3
Release top claw - Working from the same
side as the the claw in step 2, insert the tip of
a ß athead screwdriver to unlock the top claw.
a ß athead screwdriver to unlock the top claw.
4
Release top claw - Repeat Step 3 on the
opposite side.
5
Release side claw - Repeat Step 2 on the
opposite side and gently lift up and then back
to remove the cabinet.
to remove the cabinet.
1-2. SERVICE POSITION
1
Gently wiggle the A board back and forth to unplug
it from the Neck Assembly.
2
Remove all necessary connections and rotate the D
Board and rest it on its side to expose the bottom.
Be sure to reconnect all wires.
Be sure to reconnect all wires.
Fabricate a temporary ground wire with a male
stakon connector on one end and an alligator clip
on the other.
on the other.
4
Reconnect ground as shown below.
3
1
2
3
4
5
4
1
1
2
1
2
Click on the first or last page to see other CPD-E240 service manuals if exist.