CPD-205F, CPD-205FT - Sony Monitor Service Manual (repair manual). Page 8

Read Sony CPD-205F / CPD-205FT Service Manual online

CPD-205F/205FT
– 8 –
2-5-1. PICTURE  TUBE  REMOVAL
  (CPD-205F)
2-5-1. PICTURE  TUBE  REMOVAL
  (CPD-205FT)
3
When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling up it in the
direction of the arrow 
c
.
• HOW  TO  HANDLE  AN  ANODE-CAP
1
Don’t hurt the surface of anode-caps with shartp shaped material!
2
Don’t press the rubber hardly not to hurt inside of anode-caps!
A material fitting called as shatter-hook terminal is built in the
rubber.
3
Don’t turn the foot of rubber over hardly!
The shatter-hook terminal will stick out or hurt the rubber.
a
b
c
Anode Button
• REMOVAL  OF  ANODE-CAP
NOTE: Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon painted on the CRT, after
removing the anode.
• REMOVING  PROCEDURES
1
Turn up one side of the rubber cap in
the direction indicated by the arrow 
a
.
2
Using a thumb pull up the rubber cap
firmly in the direction indicated by the
arrow 
b
.
     Stand assy
(D1 board)
     A block
     Deflection yoke
     Four screws
(Self tapping screw 5)
     Anode cap
Cushion
     Picture tube
     Picture tube shield
     One screw
(Hexagon head screw M4 x 20)
     Four screws
(+BVTT 4 x 10)
     Two screws
(+BVTP 4 x 16)
     Side holder
     Two screws
(+BVTT 3 x 8)
     Side shield
10
11
1
12
2
13
3
4
5
6
7
8
9
     Stand assy
(D1 board)
     A block
     Deflection yoke
     Four screws
(Tapping screw 5)
     Anode cap
Cushion
     Picture tube
1
6
3
7
8
10
     Picture tube shield
9
     One screw
(Hexagon head screw M4 x 20)
2
     Four screws
(+BVTT 4 x 10)
4
     Two screws
(+BVTP 4 x 16)
5

Display

Click on the first or last page to see other CPD-205F / CPD-205FT service manuals if exist.

Random: