Read Sony DVP-S7700 (serv.man2) Service Manual online
– 5 –
2.
DISK REMOVAL PROCEDURE
(at POWER OFF)
(at POWER OFF)
2-1.
How to Open the Door
1) With the top case removed, rotate the gear (D) 1 in direction
A to open the door. (See Fig. 1)
Fig. 1
2-2. How to Draw out Tray
1) Insert a cross-tip screwdriver into a hole at the bottom, and
rotate the cam gear 2 in direction B. (See Fig. 2)
Note:
To prevent a damage of cam gear, rotate it in direction
B by 1/4 turn.
B by 1/4 turn.
2) Draw out the tray 3 in direction C by hand, and remove a
disk. (See Fig. 2)
Fig. 2
1
Gear (D)
A
B
C
2
Cam gear
3
Tray
Hole
3.
HOW TO SERVICE MB-84 (SIDE B) BOARD
1) Remove the case from the set. (Refer to 2-1)
2) Remove the cover (upper). (Refer to 2-3)
3) Set the MB-84 board as shown in Fig. 3.
2) Remove the cover (upper). (Refer to 2-3)
3) Set the MB-84 board as shown in Fig. 3.
Note 1:
Do not disconnect wiring.
Note 2:
Spread a insulating material under the MB-84 board
and through down lest you should short.
and through down lest you should short.
4) Mount the extention cable (J-6090-079-A).
(MB-84 (CN601)
↔
FL-107 (CN153))
Fig. 3
MB-84 board
Extention Cable
(J-6090-079-A)
(J-6090-079-A)
Click on the first or last page to see other DVP-S7700 (serv.man2) service manuals if exist.