Read Sony DVP-S3000 Service Manual online
– 8 –
6-2. Cleaning Spindle Motor Turntable
1)
Remove the tray. (Refer to 2-6)
2)
Clean the spindle motor turntable if disc antiskid rubber
(black) is dirty. (See Fig.10)
(black) is dirty. (See Fig.10)
6-4. Deformation of Insulator
1)
Assemble the spindle base into the base unit.
2)
Lock with 4 shoulder screws. (See Fig.12)
3)
Check if 4 insulators deformed. (See Fig.12)
6-3. Aligning Phase of Cam Gear and
Drive Gear
1)
Align triangle marks when assembling the cam gear and
drive gear. (See Fig.11)
drive gear. (See Fig.11)
6-5. Note on connecting OPT Harness
1)
The optical pick-up could be destroyed unless the OPT
harness is connected normally to the connector. (See Fig.13)
harness is connected normally to the connector. (See Fig.13)
Fig. 10
Fig. 12
Fig. 11
Fig. 13
Spindle motor
Turntable
Turntable
Drive gear
Cam gear
Align triangle marks.
Four step screws
Two insulators
Two insulators
Insulator
Good
NG
Good
NG
OPT harness
Connector
Click on the first or last page to see other DVP-S3000 service manuals if exist.