Read Sony DVP-NW50 Service Manual online
6
DVP-NW50
Speaker hookup
Before connecting each of speaker cables to the Unit, you must
connect them to the supplied speaker connector. See
“Connecting speaker cables to the speaker connector.”
connect them to the supplied speaker connector. See
“Connecting speaker cables to the speaker connector.”
8
SPEAKERS
a) SUB WOOFER/CENTER
Connects a sub woofer and a center speaker using a speaker
cable.
b) SUR L/SUR R
Connects surround speakers using speaker cables.
c) FRONT L/FRONT R
Connects front speakers using speaker cables.
Connects a sub woofer and a center speaker using a speaker
cable.
b) SUR L/SUR R
Connects surround speakers using speaker cables.
c) FRONT L/FRONT R
Connects front speakers using speaker cables.
Other hookup
0 DC IN
Connects the DC IN connector using the power supply cables
inserted to connect the AC power unit and a Unit.
Connects the DC IN connector using the power supply cables
inserted to connect the AC power unit and a Unit.
Hooking up the system
Antenna hookup
You can tune in AM/FM stations using the Unit.
1
ANTENNA (AM/FM)
Connects the AM loop antenna to the AM terminal.
Connect a 75 ohm coaxial cable (not supplied) from an outdoor
FM antenna (not supplied).
Connect a 75 ohm coaxial cable (not supplied) from an outdoor
FM antenna (not supplied).
Network hookup
You can connect Units to other Units or computers via a router
or a hub.
or a hub.
2
ETHERNET
Connects the Units to a router or a hub using a Ethernet cable.
Audio component hookup
You can listen to the sound from external audio equipment via
the Unit.
the Unit.
3
LINE (Analog) IN (L/R)
Connects the OUTPUT jacks (L/R) of the audio equipment to
the LINE IN (L/R) jacks of the Unit using audio cables (not
supplied).
the LINE IN (L/R) jacks of the Unit using audio cables (not
supplied).
IR IN/OUT hookup
You can control components with the remote in a wider range
by connecting the Unit and the component to IR IN/OUT.
by connecting the Unit and the component to IR IN/OUT.
4
IR IN
Connect IR IN of the Unit and IR OUT of a component, such as
a TV so that you can operate the Unit with the remote by
aiming it at the TV.
a TV so that you can operate the Unit with the remote by
aiming it at the TV.
4
IR OUT
Connect IR OUT of the Unit and IR IN of a component, such as
a CD Changer, so that you can operate the DVD Changer with
the remote by aiming it at the Unit.
a CD Changer, so that you can operate the DVD Changer with
the remote by aiming it at the Unit.
Video component hookup
Select one of the connection methods shown below, according
to the input jack on your TV monitor.
to the input jack on your TV monitor.
5
VIDEO OUT
Connects the video input of a TV or a projector and the VIDEO
OUT jack of the Unit using a video cable.
OUT jack of the Unit using a video cable.
6
S VIDEO OUT
Connects the S VIDEO input of a TV or a projector and the S
VIDEO OUT jack of the Unit using a S VIDEO cable.
VIDEO OUT jack of the Unit using a S VIDEO cable.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass
the player signals via the VCR, you may not receive a clear image on a TV
screen. If your TV has only one video input jack, connect the player to this
jack.
the player signals via the VCR, you may not receive a clear image on a TV
screen. If your TV has only one video input jack, connect the player to this
jack.
Click on the first or last page to see other DVP-NW50 service manuals if exist.