Read Sony DVP-NS765P Service Manual online
1-5
DVP-NS765P
21
H
ook
up
s
s
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
z Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
*1 Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
double-D symbol are trademarks of Dolby
Laboratories.
*2 “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects:
– TVS DYNAMIC (page 48)
– TVS WIDE (page 48)
• Surround effects:
– TVS DYNAMIC (page 48)
– TVS WIDE (page 48)
(page 22)
Stereo amplifier (receiver) and two speakers
• Surround effects:
– TVS STANDARD (page 48)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 48)
• Surround effects:
– TVS STANDARD (page 48)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 48)
(page 23)
AV amplifier (receiver) having a Dolby
*
1
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 81)
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 81)
(page 24)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital, DTS*
having a Dolby Digital, DTS*
2
, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 81)
– DTS (page 81)
– MPEG (5.1ch) (page 81)
• Surround effects:
– Dolby Digital (5.1 ch) (page 81)
– DTS (page 81)
– MPEG (5.1ch) (page 81)
(page 25)
A
D
A
B
C
D
D
,continued
22
Connecting to your TV
This connection will use your TV’s speakers for sound. If you use the SCART cord in pattern
B of “Step 3: Connecting the Video Cords” (page 17), you do not have to connect audio cords
to your TV.
B of “Step 3: Connecting the Video Cords” (page 17), you do not have to connect audio cords
to your TV.
* The yellow plug is used for video signals (page
17).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV’s audio
input jack.
A
OPTICAL
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
DIGITAL OUT
LINE (RGB)-TV
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO
Y
COMPONENT VIDEO OUT
PR/CR
PB/CB
A
R-AUDIO-L
LINE OUT
VIDEO
TV
l: Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (not
supplied)
cord (not
supplied)
(yellow)*
(white)
(red)
(yellow)*
to LINE
OUT L/R
(AUDIO)
OUT L/R
(AUDIO)
23
H
ook
up
s
s
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
B
B-1
B-2
OPTICAL
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
DIGITAL OUT
LINE (RGB)-TV
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO
Y
COMPONENT VIDEO OUT
PR/CR
PB/CB
R-AUDIO-L
LINE OUT
VIDEO
B-1
B-2
OPTICAL
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DIGITAL OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
Stereo audio cord
(not supplied)
(not supplied)
to audio input
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
or
l: Signal flow
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
,continued
24
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
rear speaker with a centre speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
OPTICAL
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DOLBY DIGITAL
DIGITAL OUT
LINE (RGB)-TV
R-AUDIO-L
LINE OUT
S VIDEO
OUT
VIDEO
Y
COMPONENT VIDEO OUT
PR/CR
PB/CB
R-AUDIO-L
LINE OUT
VIDEO
C-1
C-2
OPTICAL
COAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
DIGITAL OUT
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Centre
Rear (mono)
Stereo audio cord
(not supplied)
(not supplied)
[Speakers]
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
(red)
(white)
to coaxial or optical digital input
Coaxial digital cord
(not supplied)
(not supplied)
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
l: Signal flow
Click on the first or last page to see other DVP-NS765P service manuals if exist.