DVP-NS71HP, DVP-NS75H, DVP-NS76H - Sony DVD Service Manual (repair manual). Page 10

1-5

Select one of the following patterns 

A, or B according to the input jack on your TV monitor, 

projector, or AV amplifier (receiver). This will enable you to listen to sound.

z Hint
For correct speaker location, see the operating instructions supplied with the connected components.

S VIDEO OUT

PR/CR

Y

PB/CB

COMPONENT VIDEO OUT

LINE

(RGB)

-TV

VIDEO

AUDIO

INPUT

L

R

VIDEO

LINE OUT

AUDIO

R

L

COAXIAL

DIGITAL OUT

OPTICAL

HDMI OUT

VIDEO

LINE OUT

AUDIO

R

L

COAXIAL

DIGITAL OUT

OPTICAL

HDMI OUT

HDMI cord (not supplied)

(red)

TV, projector, or AV 
amplifier (receiver)

Audio/video 
cord (supplied)

: Signal flow

Optical digital cord 
(not supplied) 
Remove jack cap 
before connecting

to DIGITAL OUT 
(COAXIAL or OPTICAL)/HDMI OUT

to LINE OUT L/R (AUDIO)

Rear (L)

CD/DVD player

(white)

(yellow)*

(yellow)*

(white)

(red)

[Speakers]

Front (L)

[Speakers]

Rear (R)

Front (R)

Subwoofer

Center

Coaxial digital cord 
(not supplied)

or

to coaxial or optical/
HDMI digital input

AV amplifier (receiver) 
with a decoder

or

* The yellow plug is used for video signals (page 16).

A

This connection will use your TV’s or stereo 
amplifier’s (receiver’s) two speakers for 
sound. Connect using the audio/video cord 
(supplied).

• Surround effect (page 42)
TV: Dynamic Theatre, Dynamic, Wide, 
Night

Stereo amplifier (receiver): Standard, Night

B Connecting to a digital audio 
input jack

If your AV amplifier (receiver) has a Dolby 
Digital*

1

, DTS*

2

 or MPEG audio decoder 

and a digital input jack, use this connection.
Connect using a coaxial or optical digital 
cord/HDMI cord (not supplied).

• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch), MPEG 
audio (5.1ch)

*1

Manufactured under license from Dolby 
Laboratories.
“Dolby,” “Pro Logic,” and the double-D symbol 
are trademarks of Dolby Laboratories.

*2

“DTS” and “DTS Digital Out” are trademarks of 
Digital Theater Systems, Inc.

• After you have completed the connection, be sure 

to set “DOLBY DIGITAL” to “DOLBY 
DIGITAL” and “DTS” to “ON” in Quick Setup 
(page 22). If your AV amplifier (receiver) has an 
MPEG audio decoder function, set “MPEG” to 
“MPEG” in Audio Setup (page 71). Otherwise, no 
sound or a loud noise will come from your 
speakers.

• When you connect an amplifier (receiver) that 

conforms to the 96 kHz sampling frequency, set 
“48kHz/96kHz PCM” in “AUDIO SETUP” to 
“96kHz/24bit” (page 71).

• The TVS effects of this player cannot be used 

with this connection.

• When you connect the player to an AV amplifier 

(receiver) using an HDMI cord, you will need to 
do one of the following:

– Connect the AV amplifier (receiver) to the TV 

with the HDMI cord.

– Connect the player to the TV with a video cord 

other than HDMI cord (component video cord, S 
VIDEO cord, or audio/video cord).

• When connecting to the HDMI OUT jack, 

carefully align the HDMI connector with the jack. 
Do not bend and apply pressure to the HDMI 
cord.

Yellow

White (L)

Red (R)

Yellow

White (L)

Red (R)

Coaxial cord

Optical cord

HDMI cord

Plug the player and TV mains lead (power cord) into a mains.

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press 

>. To return to the previous adjustment, press ..

[/1.

“Press [ENTER] to run QUICK SETUP” 
(press enter to run Quick Setup) appears 
at the bottom of the screen. If this 
message does not appear, select 
“QUICK” (quick) under “SETUP” 
(setup) in the Control Menu to run Quick 
Setup (page 65).

The Setup Display for selecting the 
language used in the on-screen display 
appears.

X/x to select a language.

The player displays the menu and 
subtitles in the selected language.

The Setup Display for selecting the 
aspect ratio of the TV to be connected 
appears.

ENTER

LANGUAGE SETUP

OSD:
MENU:
AUDIO:
SUBTITLE:

ITALIANO

ESPAÑOL

NEDERLANDS

DANSK

SVENSKA

FRANÇAIS

ENGLISH

ENGLISH

DEUTSCH

SCREEN SETUP

TV TYPE:

16:9

4:3 LETTER BOX

4:3 PAN SCAN

FULL

HDMI RESOLUTION:

SCREEN SAVER:

YC

B

C

R

/RGB (HDMI):

BACKGROUND:
LINE:
4:3 OUTPUT:

16:9

JACKET PICTURE

VIDEO

X/x to select the setting that 

◆ If you have a wide-screen TV or a 4:3 
standard TV with a wide-screen mode
• 16:9 (page 66)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN 

(page 66)

The Setup Display for selecting the type 
of jack used to connect your amplifier 
(receiver) appears.

X/x to select the type of jack 

If you did not connect an AV amplifier 
(receiver), select “NO,” then go to step 
13.
If you connected an AV amplifier 
(receiver) using just an audio cord, select 
“YES: LINE OUTPUT L/R (AUDIO),” 
then go to step 13. 
If you connected an AV amplifier 
(receiver) using either an optical or 
coaxial  digital/HDMI cord, select “YES: 
DIGITAL OUTPUT.”  The Setup 
Display for “DOLBY DIGITAL” 
appears.

X/x to select the type of 

If your AV amplifier (receiver) has a 
Dolby Digital decoder, select “DOLBY 
DIGITAL.” Otherwise, select “D-PCM.”

“DTS” is selected.

X/x to select whether or 

If your AV amplifier (receiver) has a 
DTS decoder, select “ON.” Otherwise, 
select “OFF.” 

◆ When “DIGITAL OUTPUT” is selected 
in step 9
• Quick Setup is finished and 

connections are complete.

• If your AV amplifier (receiver) has an 

MPEG audio decoder, set “MPEG” to 
“MPEG” (page 71).

YES

NO

Is this player connected to an amplifier 
(receiver) ? Select the type of jack you 
are using.

LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:
MPEG:

OFF

STANDARD

AUDIO FILTER:

SHARP

ON

DOWNMIX:

DOLBY SURROUND

D-PCM
D-PCM

48kHz/96kHz PCM:

48kHz/16bit

DTS:

DOLBY DIGITAL

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:

OFF

STANDARD

AUDIO FILTER:

SHARP

ON

DOWNMIX:

DOLBY SURROUND

48kHz/96kHz PCM:

DTS:

MPEG:

ON

48kHz/16 bit

OFF

OFF