Read Sony DVP-NS585P / DVP-NS590P (serv.man2) Service Manual online
1-11
45
Sound Adjustments
To cancel the setting
Select “OFF” in step 2.
◆TVS DYNAMIC
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
◆TVS WIDE
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below.
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
◆TVS NIGHT
Large sounds, such as explosions, are
suppressed, but the quieter sounds are
unaffected. This feature is useful when you
want to hear the dialog and enjoy the
surround sound effects of “TVS WIDE” at
low volume.
◆TVS STANDARD
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below. Use this setting when you want to use
TVS with 2 separate speakers.
Large sounds, such as explosions, are
suppressed, but the quieter sounds are
unaffected. This feature is useful when you
want to hear the dialog and enjoy the
surround sound effects of “TVS WIDE” at
low volume.
◆TVS STANDARD
Creates virtual rear speakers from the sound
of the front speakers (L, R) without using
actual rear speakers. The virtual speakers are
reproduced as shown in the illustration
below. Use this setting when you want to use
TVS with 2 separate speakers.
Notes
• When the playing signal does not contain a signal
for the rear speakers, the surround effects will be
difficult to hear.
difficult to hear.
• When you select one of the TVS modes, turn off
the surround setting of the connected TV or
amplifier (receiver).
amplifier (receiver).
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
that the speakers are located in similar
surroundings.
• Not all discs will respond to the “TVS NIGHT”
function in the same way.
TV
TV
L: Front speaker (left)
R: Front speaker (right)
R: Front speaker (right)
: Virtual speaker
L
R
46
Enjoying Movies
Changing the Angles
If various angles (multi-angles) for a scene
are recorded on the DVD VIDEO, “
are recorded on the DVD VIDEO, “
”
appears in the front panel display. This means
that you can change the viewing angle.
that you can change the viewing angle.
1
Press
(angle) during playback.
The number of the angle appears on the
display.
display.
2
Press
(angle) repeatedly to
select the angle number.
The scene changes to the selected angle.
Note
Depending on the DVD VIDEO, you may not be
able to change the angles even if multi-angles are
recorded on the DVD VIDEO.
able to change the angles even if multi-angles are
recorded on the DVD VIDEO.
Displaying the Subtitles
If subtitles are recorded on the discs, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
change the subtitles or turn them on and off
whenever you want while playing a DVD.
1
Press
(subtitle) during
playback.
The following display appears.
2
Press
(subtitle) repeatedly to
select the setting.
◆ When playing a DVD VIDEO
Select the language.
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. Refer to
“Language Code List” on page 76 to see
which language the code represents.
◆ When playing a DVD-RW
Select “ON.”
Select the language.
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. Refer to
“Language Code List” on page 76 to see
which language the code represents.
◆ When playing a DVD-RW
Select “ON.”
To turn off the subtitles
Select “OFF” in step 2.
Note
Depending on the DVD VIDEO, you may not be
able to change the subtitles even if multilingual
subtitles are recorded on it. You also may not be
able to turn them off.
able to change the subtitles even if multilingual
subtitles are recorded on it. You also may not be
able to turn them off.
2
1:ENGLISH
47
Enjoying Movies
Adjusting the Playback
Picture
Picture
(CUSTOM PICTURE MODE)
You can adjust the video signal of the DVD,
VIDEO CD or DATA CD in JPEG format
from the player to obtain the picture quality
you want. Choose the setting that best suits
the programme you are watching.
VIDEO CD or DATA CD in JPEG format
from the player to obtain the picture quality
you want. Choose the setting that best suits
the programme you are watching.
1
Press PICTURE MODE during
playback.
playback.
The following display appears.
2
Press PICTURE MODE repeatedly
to select the setting you want.
to select the setting you want.
The default setting is underlined.
• STANDARD: displays a standard
• STANDARD: displays a standard
picture.
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the colour
intensity.
picture contrast and the colour
intensity.
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and the colour intensity.
further increasing the picture contrast
and the colour intensity.
• CINEMA 1: enhances details in dark
areas by increasing the black level.
• CINEMA 2: White colours become
brighter and black colours become
richer, and the colour contrast is
increased.
richer, and the colour contrast is
increased.
z
Hint
When you watch a movie, “CINEMA 1” or
“CINEMA 2” is recommended.
“CINEMA 2” is recommended.
PICTURE
MODE
MODE
DYNAMIC 1
48
Sharpening the Outline
of an Image
of an Image
(SHARPNESS)
The Sharpness function sharpens the outlines
of images on your TV screen.
of images on your TV screen.
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(SHARPNESS), then press ENTER.
The options for “SHARPNESS” appear.
3
Press X/x to select a level.
• 1: enhances the outline.
• 2: enhances the outline more than 1.
• 2: enhances the outline more than 1.
4
Press ENTER.
The selected setting takes effect.
To cancel the “SHARPNESS” setting
Select “OFF” in Step 3.
ENTER
DISPLAY
DVD VIDEO
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
2
1
OFF
OFF
OFF
Click on the first or last page to see other DVP-NS585P / DVP-NS590P (serv.man2) service manuals if exist.