DVP-NS500V, DVP-NS700V - Sony DVD Service Manual (repair manual). Page 5

•

Use the service jig (J-6090-116-A).

1) Remove the case from the set. (Refer to 2-1)
2) Remove the AV-59 board. (Refer to 2-2)
3) Remove the tray cover. (Refer to 2-3)
4) Remove the mechanism deck. (Refer to 2-7)
5) Remove the ER-17 board (NS700V: AEP, UK, Russian).

(Refer to 2-8)

6) Remove the MB-101 board. (Refer to 2-9)
7) Replace three flexible flat cables as shown in Fig. 2.

8) Replace jig flexible flat cable and jig harness with flexible flat

cable and harness.

1) Insert a tapering driver into the aperture of the unit bottom,

and move the lever of chuck cam in the direction of the arrow
A

. (See Fig. 1)

2) Draw out the tray in the direction of the arrow B, and remove

a disc. (See Fig. 1)

Tray

Lever of chuck cam

Aperture

B

A

1

Two flexible flat cables
(FOM-001, FMM-046)

1

Flexible flat cable
(FMM-035A)

2

Connector
(FOM-001: CN201)

2

Connector
(FMM-035A: CN204)

2

Connector
(FMM-046: CN203)

MB-101 board

Mechanism deck

2

Connector
(FMI-001A: CN101)

MB-101 board

4

Connector
(CN102)

3

Harness (MI-69A)
(CN407)

1

Flexible flat cable
(FMI-001A: CN403)