DVP-NS47P, DVP-NS508P, DVP-NS57P, DVP-NS608P, DVP-NS64P, DVP-NS67P - Sony DVD Service Manual (repair manual). Page 9

1-4

Select one of the following patterns 

A or B, according to the input jack on your TV monitor, 

projector, or audio component such as an AV amplifier (receiver). 
This will enable you to listen to sound.

z Hint
For correct speaker location, see the operating instructions supplied with the connected components.

VIDEO

AUDIO

INPUT

L

R

COAXIAL

OPTICAL

DIGITAL OUT

Audio component 
with a decoder

(red)

TV, projector, or 
audio component

Audio/video 
cord (supplied)

: Signal flow

Coaxial digital cord 
(not supplied)

to DIGITAL OUT
(COAXIAL or OPTICAL)

to LINE OUT L/R (AUDIO)

Rear (L)

CD/DVD player

(white)

(yellow)

*

(yellow)

*

(white)

(red)

[Speakers]

Front (L)

[Speakers]

to coaxial 
digital input

Rear (R)

Front (R)

Subwoofer

Centre

* The yellow plug is used for video signals (page 14).

Optical digital cord 
(not supplied)

to optical 
digital input

or

,continued

A

This connection will use your TV’s or audio 
component’s two speakers for sound.

B

If your audio component has a Dolby*

1

Digital, DTS*

2

, or MPEG audio decoder and 

a digital input jack, use this connection. You 
can enjoy Dolby Digital (5.1ch), DTS 
(5.1ch), and MPEG audio (5.1ch) surround 
effect.

*1

Manufactured under license from Dolby 
Laboratories. 
Dolby, Pro Logic, and the double-D symbol are 
trademarks of Dolby Laboratories.

*2

Manufactured under license under U.S. Patent #: 
5,451,942 & other U.S. and worldwide patents 
issued & pending. DTS and DTS Digital Out are 
registered trademarks and the DTS logos and 
Symbol are trademarks of DTS, Inc. © 1996-
2007 DTS, Inc. All Rights Reserved.

• After you have completed the connection, make 

the appropriate settings in Quick Setup (page 19). 
If your audio component has an MPEG audio 
decoder function, set “MPEG” to “MPEG” in 
AUDIO SETUP (page 54). Otherwise, no sound 
or a loud noise will come from your speakers.

• The TVS effects of this player cannot be used 

with this connection.

• In order to listen to DTS sound tracks, you must 

use this connection. DTS sound tracks are not 
output through the LINE OUT L/R (AUDIO) 
jacks, even if you set “DTS” to “ON” in Quick 
Setup (page 19).

Plug the player and TV mains lead (power cord) into a mains.

You can control the player using the supplied remote. Insert two R6 (size AA) batteries by 
matching the 

3 and # ends on the batteries to the markings inside the compartment. When 

using the remote, point it at the remote sensor 

 on the player.

• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a 

malfunction. 

• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage 

from battery leakage and corrosion.

,continued

You can control the sound level, input source, 
and power switch of your Sony TV with the 
supplied remote.

You can control your TV using the buttons 
below.

Depending on the connected unit, you may not be 
able to control your TV using all or some of the 
buttons on the supplied remote.

You can control the sound level, input source, 
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the 
appropriate manufacturer’s code.

[/1, press the 

[/1.

Code numbers of controllable TVs
If more than one code number is listed, try 
entering them one at a time until you find the 
one that works with your TV.

◆For RMT-D175P/RMT-D185P remote 
commander only

◆For RMT-D175A/RMT-D185A remote 
commander only

• When you replace the batteries of the remote, the 

code number you have set may be reset to the 
default setting. Set the appropriate code number 
again. 

• Depending on the connected unit, you may not be 

able to control your TV using all or some of the 
buttons on the supplied remote.

TV 

[/1

Turn the TV on or off

2/VOL +/–

Adjust the volume of the TV

t/TV/VIDEO Switch the TV’s input source 

between the TV and other 
input sources

TV

2

/VOL +/–

t

/TV/VIDEO

Number 
buttons

Sony

01 (default)

Aiwa

01 (default)

Grundig

11

Hitachi

24

JVC

33

LG

06

Loewe

06

Panasonic

17, 49

Philips

06, 08

Samsung

06, 71

Sanyo

25

Sharp

29

Thomson

43

Toshiba

38

Sony

01 (default)

Daewoo

04, 22

Hitachi

02, 04

JVC

09

LG/Goldstar

04

MGA/Mitsubishi 04, 13

Panasonic

19

Philips

21

RCA

04, 10

Samsung

04, 20

Sharp

18

Toshiba

07, 18