DVP-NS305, DVP-NS310, DVP-NS315, DVP-NS405, DVP-NS410, DVP-NS415, HT-1700D - Sony DVD Service Manual (repair manual)

Model
DVP-NS305 DVP-NS310 DVP-NS315 DVP-NS405 DVP-NS410 DVP-NS415 HT-1700D
Pages
106
Size
17.65 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD
File
dvp-ns305-dvp-ns310-dvp-ns315-dvp-ns405-dvp-ns410-.pdf
Date

View Sony DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS405 / DVP-NS410 / DVP-NS415 / HT-1700D Service Manual online

DVP-NS305/NS310/NS315/
NS405/NS410/NS415
RMT-D141A/D142A/D142O/D142P
US Model
Canadian Model
DVP-NS315/NS415
AEP Model
DVP-NS305/NS310/NS405/NS410
UK Model
DVP-NS305/NS405
Russian Model
Hong Kong Model
Korea Model
Taiwan Model
Saudi Arabia Model
Singapore Model
DVP-NS305
Middle East Model
Australian Model
DVP-NS305/NS415
PX Model
Mexico Model
E Model
Argentina Model
Brazilian Model
DVP-NS315
SERVICE MANUAL
CD/DVD PLAYER
System
Laser: Semiconductor laser
Signal format system: NTSC/PAL
Audio characteristics
Frequency response: DVD VIDEO (PCM 
96 kHz): 2 Hz to 44 kHz (
±1.0 dB)/DVD 
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz 
(
±0.5 dB)/CD:  2 Hz  to  20 kHz  (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB 
(LINE OUT (L/R) AUDIO jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD: 
99 dB
Wow and flutter: Less than detected value 
(
±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO) 
jacks are measured. When you play PCM 
sound tracks with a 96 kHz sampling 
frequency, the output signals from the 
DIGITAL OUT (OPTICAL or COAXIAL) 
jack are converted to 48 kHz sampling 
frequency.
Outputs/Inputs
(Jack name: Jack type/Output or Input level/
Load impedance)
LINE IN (AUDIO)*: Phono jack/–/47 
kilohms (DVP-NS315/NS415)
(DVP-NS315/NS415)
Outputs
(DVP-NS305/NS310/NS405/NS410)
LINE OUT (AUDIO): Phono jack/2 Vrms/
Over 10 kilohms
DIGITAL OUT (OPTICAL)*: Optical 
output jack/–18 dBm  (wave length: 
660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT(Y, P
B
, P
R
): 
Phono jack/Y: 1.0 Vp-p/P
B
, P
R
: 0.7 Vp-p/
75 ohms (DVP-NS315/NS415)
(DVP-NS315/NS415)
LINE IN (VIDEO)*: Phono jack/1.0 Vp-p/
75 ohms
LINE OUT (VIDEO): Phono jack/1.0 Vp-p/
75 ohms
S VIDEO OUT: 4-pin mini DIN/Y: 
1.0 Vp-p, C: 0.286 Vp-p/75 ohms
* DVP-NS405/NS410/NS415 only
General
Power requirements: 120 V AC, 60 Hz/
110 to 240V AC, 50/60 Hz 
See page 1-1 for further information.
Power consumption: 12 W/13 W 
See page 1-1 for further information.
Dimensions (approx.): 430 
×  62 ×  255 mm 
(17 
×  2 
1
/
2
 
×  10 
1
/
8
 in.) (width/height/
depth) incl. projecting parts
Mass (approx.): 2.3 kg (5 
5
/
64
lb)
Operating temperature: 5
° C to 35 ° C 
(41
°
F to 95
°
F)
Operating humidity: 25 % to 80 %
Supplied accessories
See page 1-3.
Specifications and design are subject to 
change without notice.
E
NERGY 
S
TAR
R
 is a U.S. registered mark. 
As an 
E
NERGY 
S
TAR
R
 Partner, Sony 
Corporation has determined that this product 
meets the 
E
NERGY 
S
TAR
R
 guidelines for 
energy efficiency.
(To change the color system)
SPECIFICATIONS
Photo : DVP-NS415
RMT-D142A
— 2 —
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, though functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the line cord for cracks and abrasion.
Recommend the replacement of any such line cord to the
customer.
6.
Check the B+ voltage to see it is at the values specified.
7.
Check the antenna terminals, metal trim, "metallized" knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground and
from all exposed metal parts to any exposed metal part having a
return to chassis, must not exceed 0.5mA (500 microampers).
Leakage current can be measured by any one of three methods.
1.
A commercial leakage tester, such as the Simpson 229 or RCA
TW-540A. Follow the manufacturers' instructions to use these
instruments.
2.
A battery-operated AC milliammeter. The Data Precision 245
digital multimeter is suitable for this job.
3.
Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter. The "limit" indication
is 0.75V, so analog meters must have an accurate low voltage
scale. The Simpson 250 and Sanwa SH-63Trd are examples
of a passive VOM that is suitable. Nearly all battery operated
digital multimeters that have a 2V AC range are suitable. (See
Fig. A)
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
 : LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 
0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
To Exposed Metal 
Parts on Set
0.15 
µF
1.5 k
AC
Voltmeter
(0.75 V)
Earth Ground
Fig. A.  Using an AC voltmeter to check AC leakage.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH
THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO
CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE
FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE
OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
— 3 —
TABLE OF CONTENTS
SERVICE NOTE
1.
DISC REMOVAL PROCEDURE (at POWER OFF) ········ 5
2.
HOW TO SERVICE MB-103 BOARD ······························ 5
1.
GENERAL
Precautions ············································································· 1-1
About this Manual ································································· 1-1
This Player Can Play the Following Discs ···························· 1-1
Notes about the Discs ···························································· 1-1
Index to Parts and Controls ···················································· 1-2
Guide to On-Screen Displays (Control Bar) ·························  1-3
Simple Start Guide ···································································· 1-3
Quick Overview ····································································· 1-3
Step 1: Unpacking ································································· 1-3
Step 2: Inserting Batteries into the Remote ··························· 1-3
Step 3: TV Hookups ······························································ 1-4
Step 4: Playing a Disc ···························································· 1-4
Hookups ····················································································  1-4
Hooking Up the Player ·························································· 1-4
Step 1: Connecting the Video Cords ·····································  1-4
Step 2: Connecting the Audio Cords ····································  1-5
Step 3: Connecting the Power Cord ······································· 1-6
Step 4: Quick Setup ······························································· 1-6
Playing Discs ············································································· 1-6
Playing Discs ········································································· 1-6
Searching for a Particular Point on a Disc (Scan, Slow-motion
   Play, Search, Freeze Frame) ··············································· 1-7
Resuming Playback from the Point Where You Stopped the
   Disc (Resume Play/Multi-disc Resume). ···························· 1-7
Using the DVD’s Menu ························································  1-8
Playing VIDEO CDs with PBC Functions (PBC Playback) ·  1-8
Playing an MP3 Audio Track ················································  1-8
Various Play Mode Functions (Program Play, Shuffle Play,
   Repeat Play, A-B Repeat Play) ··········································· 1-8
Searching for a Scene ·····························································  1-10
Searching for a Title/Chapter/Track/Index/Scene
   (Search mode) ··································································  1-10
Viewing Information About the Disc ······································· 1-10
Checking the Playing Time and Remaining Time ··············  1-10
Sound Adjustments ·································································  1-10
Changing the Sound ····························································· 1-10
TV Virtual Surround Settings (TVS) ··································  1-11
Enjoying Movies ····································································· 1-11
Changing the Angles ···························································  1-11
Displaying the Subtitles ······················································· 1-11
Adjusting the Picture Quality (BNR) ·································  1-12
Adjusting the Playback Picture (CUSTOM PICTURE MODE) ·  1-12
Enhancing the Playback Picture (DIGITAL VIDEO
   ENHANCER) (DVP-NS415 only) ··································· 1-12
Using Various Additional Functions ········································ 1-12
Locking Discs (CUSTOM PARENTAL CONTROL,
   PARENTAL CONTROL) ················································· 1-12
Controlling Your TV with the Supplied Remote ················· 1-13
Settings and Adjustments ·······················································  1-14
Using the Setup Display. ·····················································  1-14
Setting the Display or Sound Track Language
   (LANGUAGE SETUP) ···················································· 1-14
Settings for the Display (SCREEN SETUP) ······················  1-14
Custom Settings (CUSTOM SETUP) ································  1-15
Settings for the Sound (AUDIO SETUP) ···························· 1-15
Additional Information ···························································· 1-15
Troubleshooting ··································································  1-15
Self-diagnosis Function (When letters/numbers appear
   in the display) ··································································· 1-16
Glossary ··············································································  1-16
Language Code List ····························································· 1-16
2.
DISASSEMBLY
2-1.
UPPER CASE ································································· 2-1
2-2.
FRONT PANEL ASSEMBLY and FR SUPPORT ·········· 2-1
2-3.
LOADING ASSEMBLY ················································· 2-2
2-4.
OPTICAL DEVICE (KHM-270AAA) ··························· 2-2
2-5.
DC MOTOR and MS-81 BOARD ·································· 2-3
2-6.
ER-14 BOARD (NS305:AEP,UK,RUSSIAN/NS310/
NS405/NS410) ································································ 2-3
2-7.
AV-61 BOARD ································································ 2-4
2-8.
MB-103 BOARD ····························································· 2-4
2-9.
IF-89 BOARD ································································· 2-5
2-10. SWITCHING REGULATOR ·········································· 2-5
2-11. INTERNAL VIEWS ························································ 2-6
2-12. CIRCUIT BOARDS LOCATION ··································· 2-7
3.
BLOCK DIAGRAMS
3-1.
OVERALL BLOCK DIAGRAM ···································· 3-1
3-2.
RF/SERVO BLOCK DIAGRAM ···································· 3-3
3-3.
SIGNAL PROCESSOR BLOCK DIAGRAM ················ 3-5
3-4.
SYSTEM CONTROL BLOCK DIAGRAM ··················· 3-7
3-5.
VIDEO BLOCK DIAGRAM ·········································· 3-9
3-6.
AUDIO BLOCK DIAGRAM ········································ 3-11
3-7.
INTERFACE CONTROL BLOCK DIAGRAM ··········· 3-13
3-8.
POWER BLOCK DIAGRAM (1/3) ······························ 3-15
3-9.
POWER BLOCK DIAGRAM (2/3) ······························ 3-17
3-10. POWER BLOCK DIAGRAM (3/3) ······························ 3-19
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
4-1.
FRAME SCHEMATIC DIAGRAM ································ 4-1
4-2.
PRINTED WIRING BOARDS AND SCHEMATIC
DIAGRAM ······································································ 4-3
WAVEFORMS ································································ 4-5
• IF-89 (IF COM)
PRINTED WIRING BOARD ························· 4-7
• IF-89 (IF COM), FL-126 (LED)
SCHEMATIC DIAGRAMS ···························· 4-9
• MB-103 (DVD/CD RF AMP, DIGITAL SERVO,
MOTOR DRIVE, SERVO, AV DECODER, SDRAM,
SYSTEM CONTROL, AUDIO DAC, PLL)
PRINTED WIRING BOARD ······················· 4-11
• MB-103 (DVD/CD RF AMP, DIGITAL SERVO) (1/7)
SCHEMATIC DIAGRAM ···························· 4-15
• MB-103 (MOTOR DRIVE) (2/7),
 MS-81 (LOADING MOTOR)
SCHEMATIC DIAGRAMS ·························· 4-17
• MB-103 (SERVO) (3/7)
SCHEMATIC DIAGRAM ···························· 4-19
• MB-103 (AV DECODER) (4/7)
SCHEMATIC DIAGRAM ···························· 4-21
• MB-103 (SDRAM) (5/7)
SCHEMATIC DIAGRAM ···························· 4-23
• MB-103 (SYSTEM CONTROL) (6/7)
SCHEMATIC DIAGRAM ···························· 4-25
• MB-103 (AUDIO DAC, PLL) (7/7)
SCHEMATIC DIAGRAM ···························· 4-27
• AV-61 (AUDIO OUT, VIDEO OUT)
PRINTED WIRING BOARD ······················· 4-29
• AV-61 (AUDIO OUT) (1/2)
SCHEMATIC DIAGRAM ···························· 4-31
• AV-61 (VIDEO OUT) (2/2)
SCHEMATIC DIAGRAM ···························· 4-33
• ER-14 (EURO AV) (NS305:AEP,UK,RUS/NS310/
NS405/NS410)
PRINTED WIRING BOARD ······················· 4-35
— 4 —
• ER-14 (EURO AV) (NS305:AEP,UK,RUS/NS310/
NS405/NS410)
SCHEMATIC DIAGRAM ···························· 4-37
• HS11S1U, HS11S1F (SWITCHING REGULATOR)
PRINTED WIRING BOARDS ····················· 4-39
• ETXNY381E2F, ETXNY381N2F
(SWITCHING REGULATOR)
PRINTED WIRING BOARDS ····················· 4-41
• HS11S1U, HS11S1F (SWITCHING REGULATOR)
SCHEMATIC DIAGRAM ···························· 4-43
• ETXNY381E2F, ETXNY381N2F (SWITCHING
REGULATOR)
SCHEMATIC DIAGRAM ···························· 4-45
5.
IC PIN FUNCTION DESCRIPTION
5-1.
SYSTEM CONTROL PIN FUNCTION
(MB-103 BOARD IC104: MB91307RPFV-G-BND-E1) · 5-1
6.
TEST MODE
6-1.
GENERAL DESCRIPTION ··········································· 6-1
6-2.
STARTING TEST MODE ··············································· 6-1
6-3.
SYSCON DIAGNOSIS ··················································· 6-1
6-4.
DRIVE AUTO ADJUSTMENT ······································ 6-5
6-5.
DRIVE MANUAL OPERATION ··································· 6-7
6-6.
MECHA AGING ··························································· 6-11
6-7.
EMERGENCY HISTORY ············································ 6-11
6-8.
VERSION INFORMATION ········································· 6-11
6-9.
VIDEO LEVEL ADJUSTMENT ·································· 6-11
6-10. IF CON SELF DIAGNOSTIC FUNCTION ················· 6-12
6-11. TROUBLESHOOTING ················································ 6-19
7.
ELECTRICAL ADJUSTMENT
7-1.
POWER SUPPLY CHECK ············································· 7-1
7-2.
ADJUSTMENT OF VIDEO SYSTEM ··························· 7-2
1.
Video Level Adjustment (MB-103 BOARD) ·················· 7-2
2.
Checking S Video Output S-Y ········································· 7-2
3.
Checking S Video Output S-C ········································· 7-2
4.
Checking Component Video Output Y ···························· 7-2
5.
Checking Component Video Output B-Y ························ 7-3
6.
Checking Component Video Output R-Y ························ 7-3
7-3.
ADJUSTMENT RELATED PARTS ARRANGEMENT · 7-4
8.
REPAIR PARTS LIST
8-1.
EXPLODED VIEWS ······················································ 8-1
8-1-1. MAIN SECTION ···························································· 8-2
8-1-2. MECHANISM DECK SECTION ··································· 8-4
8-2.
ELECTRICAL PARTS LIST ·········································· 8-5
— 5 —
SERVICE NOTE
1.
DISC REMOVAL PROCEDURE (at POWER OFF)
1)
Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A. (See Fig. 1)
2)
Draw out the tray in the direction of the arrow B, and remove a disc. (See Fig. 1)
2.
HOW TO SERVICE MB-103 BOARD
• Jig
1)
Remove the upper case from the main unit. (Refer to 2-1)
2)
Remove the MB-103 board. (Refer to 2-7)
3)
Set the removed MB-103 board and CK-122 board to the stand
as shown in Fig. 2.
Tray
The lever of a zipper cam
Hole
B
A
CK-120 board
(J-6090-127-A)
CK-122 board
(J-6090-129-A)
FFC 26P J-6090-117-A,
FFC 9P   J-6090-118-A,
FFC 5P   J-6090-119-A,
FFC 15P J-6090-121-A,
FFC 25P J-6090-122-A
Harness 6P (J-6090-126-A)
Flexible flat cable five
Stand
(CK-121 board)
(J-6090-132-A)
4
 Two screws (B3)
1
 MB-103 board 
6
 CK-122 board
2
 Stand
3
 Connector (CN101)
5
 Connector (CN601)
Fig. 1.
Fig. 2.
— 6 —
4)
Fix the CK-120 board to the location where the MB-103 board is removed.
5)
Set the five flexible flat cables and the harness as shown in Fig. 4 and Fig. 5.
1
 CK-120 board
3
 FMM-041 flexible board (CN101, 26P) 
6
 FMS-17 flexible board (CN105, 5P) 
4
 FMO-004 flexible board (CN103, 9P) 
5
 MF-128 Harness (CN109, 6P)
8
 Connector (CN111, 9P)
7
 Connector (CN113, 25P)
2
 four screws
     (SUMIEITE(B3)+BV)
1
 Flat cable (FFC 26P :CN203) 
3
 Flat cable (FFC 5P  CN201)
2
 Flat cable (FFC 9P :CN204)
8
 Flat cable
    (FFC 15P :CN202(CK-121 board)) 
6
 Connector 
(CN112)
7
 Connector (CN102)
5
 Connector 
(CN104)
4
 Connector 
(CN106)
1
 Flat cable
    (FFC 25P :CN301(CK-122 board) 
3
 Harness 6P (CN102)
4
 Harness 6P (CN110)
2
 Connector (CN114)
Fig. 4.
Fig. 5.
Fig. 3.
— 7 —
6)
Set  complete!
Fig. 6.
1-1
SECTION 1
GENERAL
DVP-NS305/NS310/NS315/NS405/NS410/NS415
This section is extracted from instruction
manual. (DVP-NS315/NS415 : 3-073-
379-11)
3
Precautions
• The power requirements and power 
consumption of this player are indicated on 
the back of the player. Check that the 
player’s operating voltage is identical with 
your local power supply.
On safety
• Caution – The use of optical instruments 
with this product will increase eye hazard.
• To prevent fire or shock hazard, do not 
place objects filled with liquids, such as 
vases, on the apparatus.
• Should any solid object or liquid fall into 
the cabinet, unplug the player and have it 
checked by qualified personnel before 
operating it any further.
On power sources
• The player is not disconnected from the AC 
power source as long as it is connected to 
the wall outlet, even if the player itself has 
been turned off.
• If you are not going to use the player for a 
long time, be sure to disconnect the player 
from the wall outlet. To disconnect the AC 
power cord, grasp the plug itself; never pull 
the cord.
• Should the AC power cord need to be 
changed, have it done at a qualified service 
shop only.
On placement
• Place the player in a location with adequate 
ventilation to prevent heat build-up in the 
player.
• Do not place the player on a soft surface 
such as a rug that might block the 
ventilation holes on the bottom.
• Do not place the player in a location near 
heat sources, or in a place subject to direct 
sunlight, excessive dust, or mechanical 
shock.
For the model supplied with the AC plug 
adaptor
If the AC plug of your unit does not fit into 
the wall autlet, attach the supplied AC plug 
adaptor.
On operation
• If the player is brought directly from a cold 
to a warm location, or is placed in a very 
damp room, moisture may condense on the 
lenses inside the player. Should this occur, 
the player may not operate properly. In this 
case, remove the disc and leave the player 
turned on for about half an hour until the 
moisture evaporates.
• When you move the player, take out any 
discs. If you don’t, the disc may be 
damaged.
On adjusting volume
Do not turn up the volume while listening to 
a section with very low level inputs or no 
audio signals. If you do, the speakers may be 
damaged when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a 
soft cloth slightly moistened with a mild 
detergent solution. Do not use any type of 
abrasive pad, scouring powder or solvent 
such as alcohol or benzine.
If you have any questions or problems 
concerning your player, please consult your 
nearest Sony dealer.
On cleaning discs
Do not use a commercially available cleaning 
disc. It may cause a malfunction.
DVP–XXXX 
00V 00Hz
00W
NO. 
0-000-000-00
X
Power requirements and 
power consumption 
t
IMPORTANT NOTICE
Caution: This player is capable of holding a 
still video image or on-screen display image 
on your television screen indefinitely. If 
you leave the still video image or on-screen 
display image displayed on your TV for an 
extended period of time you risk permanent 
damage to your television screen. 
Projection televisions are especially 
susceptible to this.
6
About this Manual
• Instructions in this manual describe the 
controls on the remote. You can also use the 
controls on the player if they have the same 
or similar names as those on the remote.
• The meaning of the icons used in this 
manual is described below:
* MP3 (MPEG 1 Audio Layer 3) is a standard 
format defined by ISO/MPEG which compresses 
audio data.
This Player Can Play the 
Following Discs
The “DVD VIDEO” logo is a trademark.
Region code
Your player has a region code printed on the 
back of the unit and only will play DVD 
VIDEO discs (playback only) labeled with 
identical region codes. This system is used to 
protect copyrights.
DVDs labeled 
 will also play on this 
player.
If you try to play any other DVD, the message 
“Playback prohibited by area limitations.” 
will appear on the TV screen. Depending on 
the DVD, no region code indication may be 
labeled even though playing the DVD is 
prohibited by area restrictions.
Example of discs that the player 
cannot play
The player cannot play the following discs:
• All CD-ROMs (including PHOTO CDs)/
CD-Rs/CD-RWs other than those recorded 
in the following formats:
–music CD format
–video CD format
–MP3 format that conforms to ISO9660* 
Level 1/Level 2, or its extended format, 
Joliet
• Data part of CD-Extras
• DVD-RWs in VR mode
• DVD-ROMs
• DVD Audio discs
• HD layer on Super Audio CDs
* A logical format of files and folders on CD-
ROMs, defined by ISO (International Standard 
Organization).
Also, the player cannot play the following 
discs:
• A DVD with a different region code.
Check your model name
The instructions in this manual are for the 2 
models: DVP-NS315 and DVP-NS415. 
Check your model name by looking at the 
front panel of the player. DVP-NS415 is the 
model used for illustration purposes. Any 
difference in operation is clearly indicated 
in the text, for example, “DVP-NS415 
only.”
Icon
Meaning
Functions available for DVD 
VIDEOs or DVD-Rs/DVD-
RWs in video mode
Functions available for VIDEO 
CDs or CD-Rs/CD-RWs in 
video CD format
Functions available for DATA 
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio 
tracks)
Functions available for music 
CDs or CD-Rs/CD-RWs in 
music CD format
Format of discs
DVD VIDEO
VIDEO CD
Format of discs
Music CD
ALL
DVP–XXXX 
00V 00Hz
00W
NO. 
0-000-000-00
X
Region code
7
• A disc recorded in a color system other than 
NTSC, such as PAL or SECAM (this player 
conforms to the NTSC color system).
• A disc that has a non-standard shape (e.g., 
card, heart).
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane 
tape or a sticker still left on it.
Note
Some CD-Rs, CD-RWs, DVD-Rs, or DVD-RWs 
(in video mode) cannot be played on this player due 
to the recording quality or physical condition of the 
disc, or the characteristics of the recording device.
Furthermore, the disc will not play if it has not been 
correctly finalized. For more information, see the 
operating instructions for the recording device.
Note that discs created in the Packet Write format 
cannot be played.
Note on playback operations of 
DVDs and VIDEO CDs
Some playback operations of DVDs and 
VIDEO CDs may be intentionally set by 
software producers. Since this player plays 
DVDs and VIDEO CDs according to the disc 
contents the software producers designed, 
some playback features may not be available. 
Also, refer to the instructions supplied with 
the DVDs or VIDEO CDs.
Copyrights
This product incorporates copyright 
protection technology that is protected by 
method claims of certain U.S. patents, other 
intellectual property rights owned by 
Macrovision Corporation, and other rights 
owners. Use of this copyright protection 
technology must be authorized by 
Macrovision Corporation, and is intended for 
home and other limited viewing uses only 
unless otherwise authorized by Macrovision 
Corporation. Reverse engineering or 
disassembly is prohibited.
Notes about the Discs
• To keep the disc clean, handle the disc by its 
edge. Do not touch the surface.
• Do not expose the disc to direct sunlight or 
heat sources such as hot air ducts, or leave it 
in a car parked in direct sunlight as the 
temperature may rise considerably inside 
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
Wipe the disc from the center out.
• Do not use solvents such as benzine, 
thinner, commercially available cleaners, or 
anti-static spray intended for vinyl LPs.
1-2
8
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front panel
DVP-NS315
DVP-NS415
A [/1 (on/standby) button/indicator (27)
Lights up in green when the power is on 
and lights up in red when the player is in 
standby mode.
B Disc tray (27)
C A (open/close) button (27)
D Front panel display (9)
E
 (remote sensor) (15)
F Playback Dial (DVP-NS315) (28) (30)
Multi-mode Playback Dial (DVP-
NS415) (28) (30)
G MODE CHANGE button (DVP-
NS415 only) (30)
H x (stop) button (28)
I X (pause) button (28)
J SURROUND button (44)
K PICTURE MODE button (49)
9
Front panel display
When playing back a DVD
When playing back a VIDEO CD with Playback Control (PBC) (32)
When playing back a CD, DATA CD (MP3 audio), or VIDEO CD (without PBC)
Current title/chapter or playing 
time (41)
Disc type
Current audio signal (43)
Lights up when you can change the angle (47)
Lights up during 
Repeat Play (38)
Playing status
Disc type
Current scene or playing time (41)
Playing status
Lights up during A-B 
Repeat Play (39)
Playing time (41)
Disc type
Current track (41)
Lights up during 
Repeat Play (38)
Lights up when playing MP3 audio tracks (33)
Playing status
,continued
10
Rear panel
DVP-NS315
DVP-NS415
A DIGITAL OUT (COAXIAL) jack (22) 
(23) (24)
B DIGITAL OUT (OPTICAL) jack 
(DVP-NS415 only) (22) (23) (24)
C LINE IN L/R (AUDIO) jacks (DVP-
NS415 only) (16) (18)
D LINE IN (VIDEO) jack (DVP-NS415 
only) (16) (18)
E S VIDEO OUT jack (18)
F COMPONENT VIDEO OUT jacks 
(18)
G LINE OUT (VIDEO) jack (18)
H LINE OUT L/R (AUDIO) jacks (21) 
(22) (23)
PCM/DTS/
DOLBY DIGITAL
COMPONENT
VIDEO OUT
COAXIAL
R-AUDIO-L
VIDEO
DIGITAL OUT
LINE OUT
P
R
P
B
Y
S VIDEO
OUT
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO-L
VIDEO
R-AUDIO-L
IN
OUT
VIDEO
DIGITAL OUT
LINE
P
R
P
B
Y
11
Remote
DVP-NS315
A
Z
 OPEN/CLOSE button (28)
B SUR (surround) button (44)
C SUBTITLE button (47)
D AUDIO button (43)
E ANGLE button (47)
F CLEAR button (35)
G ./> PREV/NEXT (previous/
next) buttons (28)
H
 
m/M  
SCAN/SLOW 
buttons (29)
I X PAUSE button (28)
J H PLAY button (27)
The 
H button has a tactile dot.*
K C/X/x/c buttons (32)
L DISPLAY button (13)
M TOP MENU button (32)
N TV [/1 (on/standby) button (55)
O [/1 (on/standby) button (27)
P PICTURE MODE button (49)
Q VOL (volume) +/– buttons (55)
The + button has a tactile dot.*
R TV/VIDEO button (55)
S SEARCH MODE button (40)
T REPLAY button (28)
U x STOP button (28)
V ENTER button (25)
W O RETURN button (32)
X MENU button (32) (33)
* Use the tactile dot as a reference when operating 
the player.
,continued
1-3
12
DVP-NS415
A TV [/1 (on/standby) button (55)
B
Z
 OPEN/CLOSE button (28)
C Number buttons (32)
The number 5 button has a tactile dot.*
D CLEAR button (35)
E SUBTITLE button (47)
F AUDIO button (43)
G ./> PREV/NEXT (previous/
next) buttons (28)
H
 
m/M  
SCAN/SLOW 
buttons (29)
I X PAUSE button (28)
J H PLAY button (27)
The 
H button has a tactile dot.*
K C/X/x/c buttons (32)
L DISPLAY button (13)
M TOP MENU button (32)
N [/1 (on/standby) button (27)
O VOL (volume) +/– buttons (55)
The + button has a tactile dot.*
P TV/VIDEO button (55)
Q ENTER button (performs the same 
function as 
Z)
R PICTURE MODE button (49)
S ANGLE button (47)
T SUR (surround) button (44)
U TIME/TEXT button (41)
V REPEAT button (38)
W REPLAY button (28)
X SEARCH MODE button (40)
Y x STOP button (28)
Z ENTER button (25)
wj O RETURN button (32)
wk MENU button (32) (33)
* Use the tactile dot as a reference when operating 
the player.
13
Guide to On-Screen 
Displays 
(Control Bar)
The following explains the Control Bar. The 
Control Bar is used for making adjustments to 
the settings or displaying information during 
playback.
The displayed contents differ according to the 
type of disc being played. The numbers in 
parentheses indicate reference pages.
Displaying the Control Bar during 
playback
The following displays appear when the 
DISPLAY button is pressed repeatedly 
during playback. You can select the setting 
that suits the current playback item and view 
the related information.
Display 1
The following play modes 1~4 can be set. 
The indicator lights up in blue when activated.
Example: When Repeat Play is selected. (The 
display will differ when A-B Repeat Play is 
set.)
A Repeat Play (38)
B Shuffle Play (37)
C Program Play (35)
D A-B Repeat Play (39)
E Unit being repeated in this example.
F Playback status (NPlayback,  
XPause, xStop, etc.)
m
Display 2
The following play modes 7~0 can be set. 
The indicator lights up in blue when activated.
Example: When “TVS” is set.
G TVS (44)
H “BNR” (48)
I “CUSTOM PICTURE MODE” (49)
J “DIGITAL VIDEO ENHANCER” 
(50) (DVP-NS415 only)
m
Display 3
The following playback information is 
displayed.
Example: When playing a DVD.
K TIME/TEXT icon
L Title number of the DVD (40)
M Chapter number of the DVD (40)
N Playing time or remaining time (41)
m
Display 4
 (DVD playback only)
O Format of the current audio signal (43)
m
No display
m
Return to Display 1
CHAPTER
T41 –  8 
T 1:01:57
DOLBY DIGITAL 3 / 2 .1
,continued
14
Displaying the Control Bar in 
stop mode
The following displays appear when the 
DISPLAY button is repeatedly pressed 
during stop mode. You can make basic 
adjustments and customize the player to suit 
your viewing preferences.
Display 1
The following settings can be made.
A
 SETUP (57)
• Select QUICK to make the minimum 
number of basic adjustments for using the 
player.
• Select CUSTOM to make a full range of 
adjustments.
• Select RESET to return the SETUP 
adjustments to the default settings.
B
 PARENTAL CONTROL (51)
• Set this to limit the playback of selected 
discs on this player.
m
Display 2
Shows the same information as Display 1 
during playback.
m
Display 3
Shows the same information as Display 2 
during playback.
m
Display 4
Shows the same information as Display 3 
during playback.
m
No display
m
Return to Display 1
QUICK
CHAPTER
T41 –  8 
T 1:01:57
15
S
imp
le
 S
ta
rt 
Gu
id
e
Simple Start Guide
Quick Overview
A quick overview presented in this guide will 
give you enough information to start using the 
player for your enjoyment. To use the 
surround sound features of this player, refer 
to “Hookups” on page 18.
Notes
• You cannot connect this player to a TV that does 
not have a video input jack. 
• Be sure to disconnect the power of each 
component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (pinplug 
×  3 y pinplug 
×  3) (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• A plug adapter is included with some 
models.
Step 2: Inserting 
Batteries into the 
Remote
You can control the player using the supplied 
remote. Insert two Size AA (R6) batteries by 
matching the 
3 and # ends on the batteries 
to the markings inside the compartment. 
When using the remote, point it at the remote 
sensor 
 on the player.
Notes
• Do not leave the remote in an extremely hot or 
humid place. 
• Do not drop any foreign object into the remote 
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light 
from the sun or a lighting apparatus. Doing so 
may cause a malfunction. 
• If you do not use the remote for an extended 
period of time, remove the batteries to avoid 
possible damage from battery leakage and 
corrosion.

Download Sony DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS405 / DVP-NS410 / DVP-NS415 / HT-1700D Service Manual (Repair Manual)

Here you can view online and download Sony DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS405 / DVP-NS410 / DVP-NS415 / HT-1700D Service Manual in PDF. DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS405 / DVP-NS410 / DVP-NS415 / HT-1700D service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS405 / DVP-NS410 / DVP-NS415 / HT-1700D DVD. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.