Read Sony DVP-NS300 Service Manual online
– 5 –
1) Remove the case from the set. (Refer to 2-1)
2) Remove the MB-98 board. (Refer to 2-1)
3) Set the stand (with CK-106 board) as shown in Fig. 2.
2) Remove the MB-98 board. (Refer to 2-1)
3) Set the stand (with CK-106 board) as shown in Fig. 2.
Fig. 2
4) Set the Jig A board as shown in Fig. 3.
Fig. 3
2.
DISC REMOVAL PROCEDURE
(at POWER OFF)
(at POWER OFF)
1) Insert a tapering driver into the aperture of the unit bottom,
and move the lever of chuck cam in the direction of the arrow
A
A
. (See Fig. 1)
2) Draw out the tray in the direction of the arrow B, and remove
a disc. (See Fig. 1)
Fig. 1
3.
HOW TO SERVICE MB-98 BOARD
• Jig (J-6090-107-A) Extension cable
CK-105 board
Stand
(with CK-106 Board)
(with CK-106 Board)
Eight flexible flat cables
FFC 5P, FFC 9P, FFC 15P, FFC26P,
FFC 9P (DVP-NS500P/NS700P),
FFC 15P (DVP-NS400D),
FFC 25P (EXCEPT DVP-NS300 J model),
FFC 29P (DVP-NS300 J model)
FFC 9P (DVP-NS500P/NS700P),
FFC 15P (DVP-NS400D),
FFC 25P (EXCEPT DVP-NS300 J model),
FFC 29P (DVP-NS300 J model)
1
MB-98 board
2
Stand
(with CK-106 board)
(with CK-106 board)
3
Connector (CN101)
Tray
Lever of chuck cam
Aperture
B
A
4
Connector (CN109)
1
CK-105 board
3
Claw
2
Click on the first or last page to see other DVP-NS300 service manuals if exist.