Read Sony DVP-NC875V Service Manual online
— 6 —
DVP-NC875V
4.
NOTE ON MOUNTING THE GEARS
1)
Mount the gear (chuck). (See Fig. 5)
2)
Rotate the gear (chuck) in the direction of the arrow. (down
position) (See Fig. 5)
position) (See Fig. 5)
3)
Connect the boss of the gear (swing) with the groove of the
rotary encoder and mount the gear (swing). (See Fig. 6)
rotary encoder and mount the gear (swing). (See Fig. 6)
4)
Align triangle mark of the chassis with the groove of the gear
(swing). (See Fig. 6)
(swing). (See Fig. 6)
Gear (chuck)
Align triangle mark of the chassis
with the groove of the gear (swing).
with the groove of the gear (swing).
Gear (swing)
Gear (swing)
Boss
Groove
5)
Mount the while aligning the engagement of the gear (swing)
and the gear (chuck). (See Fig. 7)
and the gear (chuck). (See Fig. 7)
Engagement the gear (swing) and the gear (chuck).
Gear (swing)
Gear (chuck)
Fig. 5.
Fig. 6.
Fig. 7.
— 6E —
CAUTION
When handling IF-114 PWB avoid contact with the sharp metal
edge on the top side of Vacuum Fluorescent Display (ND401).
When handling IF-114 PWB avoid contact with the sharp metal
edge on the top side of Vacuum Fluorescent Display (ND401).
5.
Caution Point on the PWB IF-114
Click on the first or last page to see other DVP-NC875V service manuals if exist.