DVP-NC85H, HT-7000DH - Sony DVD Service Manual (repair manual). Page 11

1-6

A

This connection will use your TV’s or stereo 
amplifier’s (receiver’s) two speakers for 
sound. Connect using the audio/video cord 
(supplied).

• Surround effect (page 45)
TV: Dynamic Theater, Dynamic, Wide, 
Night

Stereo amplifier (receiver): Standard, Night

B

If your AV amplifier (receiver) has a Dolby 
Digital*

1

 or DTS*

2

 decoder and a digital 

input jack, use this connection.
Connect using a coaxial or optical digital 
cord/HDMI cord (not supplied).

• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch)

*1

Manufactured under license from Dolby 
Laboratories. “Dolby,” “Pro Logic,” and the 
double-D symbol are trademarks of Dolby 
Laboratories.

*

2

“DTS” and “DTS Digital Out” are trademarks of 
Digital Theater Systems, Inc.

• After you have completed the connection, be sure 

to set “DOLBY DIGITAL” to “DOLBY 
DIGITAL” and “DTS” to “ON” in Quick Setup 
(page 24).

• When you connect an amplifier (receiver) that 

conforms to the 96 kHz sampling frequency, set 
“48kHz/96kHz PCM” in “AUDIO SETUP” to 
“96kHz/24bit” (page 70).

• The TVS effects of this player cannot be used 

with this connection.

• When you connect the player to an AV amplifier 

(receiver) using an HDMI cord, you will need to 
do one of the following:

– Connect the AV amplifier (receiver) to the TV 

with the HDMI cord.

– Connect the player to the TV with a video cord 

other than HDMI cord (component video cord, S 
VIDEO cord, or audio/video cord).

• When connecting to the HDMI OUT jack, 

carefully align the HDMI connector with the jack. 
Do not bend and apply pressure to the HDMI 
cord.

Yellow

White (L)

Red (R)

Yellow

White (L)

Red (R)

Optical cord

HDMI cord

Coaxial cord

,continued

Plug the player and TV power cords into an AC outlet.

Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press 

>. To return to the previous adjustment, press ..

[/1.

“Press [ENTER] to run QUICK SETUP” 
(press enter to run Quick Setup) appears 
at the bottom of the screen. If this 
message does not appear, select 
“QUICK” (quick) under “SETUP” 
(setup) in the Control Menu to run Quick 
Setup (page 64).

The Setup Display for selecting the 
language used in the on-screen display 
appears.

X/x to select a language.

The player displays the menu and 
subtitles in the selected language.

The Setup Display for selecting the 
aspect ratio of the TV to be connected 
appears.

ENTER

LANGUAGE SETUP

OSD:
MENU:
AUDIO:
SUBTITLE:

FRENCH

ENGLISH
ENGLISH

SPANISH

PORTUGUESE

SCREEN SETUP

TV TYPE:

16:9

4:3 PAN SCAN

4:3 LETTER BOX

ON

OFF

HDMI RESOLUTION:

SCREEN SAVER:

JACKET PICTURE

BACKGROUND:

YC

B

C

R

/RGB (HDMI):

BLACK LEVEL:
BLACK LEVEL 

(COMPONENT OUT)

:

FULL

4:3 OUTPUT:

16:9

X/x to select the setting that 

◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN 

(page 65)

◆ If you have a wide-screen TV or a 4:3 
standard TV with a wide-screen mode
• 16:9 (page 65)

The Setup Display for selecting the type 
of jack used to connect your amplifier 
(receiver) appears.

X/x to select the type of jack 

If you did not connect an AV amplifier 
(receiver), select “NO,” then go to step 
13.
If you connected an AV amplifier 
(receiver) using just an audio cord, select 
“YES: LINE OUTPUT L/R (AUDIO),” 
then go to step 13.
If you connected an AV amplifier 
(receiver) using a digital coaxial or 
optical/HDMI cord, select “YES: 
DIGITAL OUTPUT.” 

X/x to select the type of 

If your AV amplifier (receiver) has a 
Dolby Digital decoder, select “DOLBY 
DIGITAL.” Otherwise, select “D-PCM.”

“DTS” is selected.

X/x to select whether or 

If your AV amplifier (receiver) has a 
DTS decoder, select “ON.” Otherwise, 
select “OFF.”

Quick Setup is finished. All connections 
and setup operations are complete.

Is this player connected to an amplifier 
(receiver)? Select the type of jack you 
are using.

LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT

YES

NO

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:

OFF

STANDARD

AUDIO FILTER:

SHARP

ON

DOWNMIX:

DOLBY SURROUND

D-PCM
D-PCM

48kHz/96kHz PCM:

DTS:

DOLBY DIGITAL

AUDIO SETUP

AUDIO ATT:
AUDIO DRC:

DIGITAL OUT:

DOLBY DIGITAL:

OFF

STANDARD

AUDIO FILTER:

SHARP

ON

DOWNMIX:

DOLBY SURROUND

D-PCM

OFF

48kHz/96kHz PCM:

ON

DTS:

OFF

Depending on the DVD or VIDEO CD, some 
operations may be different or restricted.
Refer to the operating instructions supplied 
with your disc.

[/1.

The player turns on.

◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and 
select the appropriate channel so that you 
can hear sound from the player.

A on the player, and place a 

To place other discs on the tray, press 
DISC SKIP and place the discs in the 
order you want to play them.
Each time you press DISC SKIP, the disc 
tray turns so you can place the discs on 
the empty compartments. The player 
plays from the last disc placed on the tray.

H.

The disc tray closes. The player starts 
playback (continuous play). Adjust the 
volume on the TV or the amplifier 
(receiver).
Depending on the disc, a menu may 
appear on the TV screen. For DVD 
VIDEOs, see page 30. For VIDEO CDs, 
see page 31.

To turn off the player
Press

 [/1. The player enters standby mode.

z Hint
You can have the player turn off automatically 
whenever you leave it in stop mode for more than 
30 minutes. To turn this function on or off, set 
“AUTO POWER OFF” in “CUSTOM SETUP” to 
“ON” or “OFF” (page 67).

Notes on playing DTS sound tracks on a 
DVD VIDEO
• DTS audio signals are output only through 

the DIGITAL OUT (COAXIAL or 
OPTICAL)/HDMI OUT jack.

• When you play a DVD VIDEO with DTS 

sound tracks, set “DTS” to “ON” in 
“AUDIO SETUP” (page 70).

• If you connect the player to audio 

equipment without a DTS decoder, do not 
set “DTS” to “ON” in “AUDIO SETUP” 
(page 70). A loud noise may come out from 
the speakers, affecting your ears or causing 
the speakers to be damaged.

DISC SKIP

ENTER

RETURN

DISC SKIP

Playback side 
facing down

Disc 
compartment 
number