Read Sony DVP-NC675P / HT-4800DP / HT-5800DP / HT-6800DP Service Manual online
1-5
DVP-NC675P
23
H
ook
up
s
s
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
S VIDEO OUT
LINE OUT
COMPONENT
VIDEO OUT
VIDEO
PR
Y
PB
NORMAL
PROGRESSIVE
DIGITAL OUT
COAXIAL
OPTICAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
LINE OUT
R-AUDIO-L
PCM/DTS/
DOLBY
DIGITAL
DIGITAL OUT
COAXIAL
OPTICAL
LINE OUT
R-AUDIO-L
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Center
Rear (mono)
Stereo audio cord
(not supplied)
(not supplied)
Coaxial digital cord
(not supplied)
(not supplied)
(red)
(white)
to coaxial or optical digital input
[Speakers]
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
to DIGITAL OUT
(OPTICAL or COAXIAL)
(OPTICAL or COAXIAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
(not supplied)
Remove jack cap
before connecting.
or
[Speakers]
c continued
24
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver).
amplifier (receiver).
z
Hint
Use connection
when connecting to 7 or
more speakers (6.1ch or more).
Notes
• After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” in Quick Setup (page 25).
and “DTS” to “ON” in Quick Setup (page 25).
• In order to listen to DTS sound tracks, you must
use these connections. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 25).
output through the LINE OUT L/R (AUDIO)
jacks, even if you set “DTS” to “ON” in Quick
Setup (page 25).
• When you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency, set
“48 kHz/96 kHz PCM” in “AUDIO SETUP” to
“96 kHz/24 bit” (page 69).
“48 kHz/96 kHz PCM” in “AUDIO SETUP” to
“96 kHz/24 bit” (page 69).
D
S VIDEO OUT
LINE OUT
COMPONENT
VIDEO OUT
VIDEO
PR
Y
PB
NORMAL
PROGRESSIVE
DIGITAL OUT
COAXIAL
OPTICAL
PCM/DTS/
DOLBY
DIGITAL
DIGITAL
LINE OUT
R-AUDIO-L
PCM/DTS/
DOLBY
DIGITAL
DIGITAL OUT
COAXIAL
OPTICAL
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
a decoder
Subwoofer
Center
Optical digital cord
(not supplied)
Remove jack cap
before connecting.
(not supplied)
Remove jack cap
before connecting.
[Speakers]
CD/DVD player
l: Signal flow
[Speakers]
Rear (L)
to optical digital
input
input
to DIGITAL OUT
(COAXIAL)
(COAXIAL)
Coaxial digital cord
(not supplied)
(not supplied)
to DIGITAL OUT
(OPTICAL)
(OPTICAL)
to Coaxial digital
input
input
or
D
25
H
ook
up
s
s
Step 5: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Step 6: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
To skip an adjustment, press >. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press [/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP.”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 65).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Menu to run Quick Setup (page 65).
4
Press ENTER without inserting a
disc.
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press X/x to select the setting that
matches your TV type.
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 66)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 66)
standard TV with a wide-screen mode
• 16:9 (page 66)
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 PAN SCAN
4:3 LETTER BOX
16:9
4:3 LETTER BOX
BLACK LEVEL:
BLACK LEVEL
BLACK LEVEL
(COMPONENT OUT)
:
OFF
MODE
(PROGRESSIVE)
:
AUTO
c continued
26
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (
connection you selected on pages 21 to
24 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through
).
• D-PCM (page 69)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 69)
decoder) (page 69)
11
Press ENTER.
“DTS” is selected.
12
Press X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through
).
• OFF (page 69)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 69)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
48kHz/96kHz PCM:
DOLBY DIGITAL
D-PCM
D-PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
OFF
48kHz/96kHz PCM:
OFF
ON
B
D
B-2
C-2
D
Click on the first or last page to see other DVP-NC675P / HT-4800DP / HT-5800DP / HT-6800DP service manuals if exist.